VT2832
Switch Matrix Module
The Switch Matrix Module VT2832 allows arbitrary switching of currents in a matrix with eight columns and four rows. This can be used for example to connect different channels one by one to a measurement device.
Four additional channels can be switched directly which also leads to overall eight individually switchable channels. By the exclusive use of semiconductor switch elements, the number of switching cycles is practically unlimited.
Characteristics: VT2832
Functions for Each Column
- In each of the eight columns, the overall current and the voltage against AGND can be measured.
- In addition to the individual switching of single matrix nodes, each column can be switched in PWM mode or with an encoding bitstream.
- With this feature, for example periodic switching operations or bouncing contact simulations can be generated.
Technical Data
VT2832 | ||
Switchable voltage | -60 V … +60 V | |
Current per path | 16 A (up to 25A for max. 10ms) | |
Contact resistance | Max. 20 mΩ | |
Signal transmission capability (square signal) | Max. 50 kHz | |
Switching Function | ||
PWM frequence range | 20 mHz … 10 kHz | |
PWM Duty Cycle | 1 … 99 % | |
Length of bit stream | 2 … 4096 bit | |
Output of interval | 50 … 65000 μs | |
Frequency of generated PWM signal | 500 ns | |
Voltage Measurement | ||
Accuracy (at 23 °C) | ± (0,1% + 50 mV) | |
A/D converter (per channel, internal) | 16 Bit / 250 kSamples/s | |
Current Measurement | ||
Accuracy (at 23 °C) | ± (0,1% + 50 mA) | |
A/D converter (per channel, internal) | 16 Bit / 250 kSamples/s | |
Basic Data | ||
Supply voltage (via backplane) | 12 V ±10 % | |
Power consumption (all relays off) | Typ. 5,8 W | |
Power consumption (8 nodes active) | Typ. 6,2 W | |
Temperature range | 0 … 55 °C | |
Dimensions (L x W x H) | 300 x 173 x 36 mm | |
Weight | Approx. 418 g | |
Maintenance | ||
Calibration recommended | every 12 months | |
Accredited (pre/re) calibration according to | ISO/IEC 17025:2017 |