VN5610A/VN5640 - Powerful and Multifunctional USB Network Interfaces for Automotive Ethernet and CAN FD
The VN5610A and VN5640 are compact and very powerful interfaces with USB host connection for accessing Ethernet and CAN (FD) networks.
There are many use cases for the VN5610A and VN5640 such as Ethernet monitoring, frame- as well as load generation or synchronous tracing of Ethernet frames with other bus systems such as CAN.
Furthermore the VN5640 interface offers with its numerous Ethernet channels a powerful platform for extensive analysis, simulation or complex testing tasks within an Automotive Ethernet network.
Two (VN5610A) independent Ethernet channels for the IEEE standards 100BASE-T1 (BroadR-Reach) as well as 10BASE-T/100BASE-TX/1000BASE-T
Twelve (VN5640) independent Ethernet channels for the IEEE standards 100BASE-T1 (thereof up to six channels 1000BASE-T1 in the Option 1000BASE-T1) and four additional channels 10BASE-T/100BASE-TX/1000BASE-T
Two CAN highspeed channels (CAN FD capable)
Ethernet monitoring between two nodes
Additional IO interface for setting (e.g. the DoIP Activation Line) or sampling of digital values
Comprehensive analysis on a network with multiple nodes (VN5640)
Optimal support of Diagnostics over IP through additional DoIP Activation Line
Hardware filtering of Ethernet and CAN data already integrated on the interface
Integrated Layer 2 switch for optimized remaining bus simulation with several channels (VN5640)
Hardware load generators for low jitter and full bandwidth
Host connection via USB 2.0 and/or USB 3.0 (VN5640) as well as USB-bus-powered power supply (VN5610A)
Precise time stamps
Optimal performance when used with CANoe/CANalyzer.Ethernet
Synchronization between multiple devices and with other bus systems (CAN, LIN, FlexRay, MOST)
Fastest flashing with the Vector flash tool vFlash
Open interface for third-party tools with the XL Driver Library (CAN and Ethernet)
High flexibility by reconfigurable FPGA hardware architecture
Rugged housing, power supply and temperature range ideal for automotive or other industrial applications
With CANoe.AFDX or CANalyzer.AFDX access to the Ethernet-based AFDX® protocol that is widely used in the aerospace industry (VN5610A)
VN5610A/VN5640 Option 100 BASE-T1
VN5640 Option 100BASE-T1
VN5640 Option 100BASE-T1
VN5640 Option 1000BASE-T1
Remaining bus simulation: Independent channels for Ethernet and CAN. On all channels, simultaneous operation of remaining bus simulation is possible with CANoe/CANalyzer.Ethernet.
Media converter: Data link between 100BASE-T1 (BroadR-Reach) and 100BASE-TX/1000BASE-T physical layer. VN5640 Option 1000BASE-T1 with additional data link between 1000BASE-T1 and 1000BASE-T. Benefit: Standard Ethernet logger and Ethernet accessories can be connected.
Direct access: Individual access to each channel, for example, for reprogramming of ECUs for vehicle diagnostics or testing of several identical systems on a test bench.
Ethernet monitoring: Transparent connection (in/out/monitor) between two nodes (e.g. Diagnostic over IP Monitoring) and monitoring with exact time stamps.
The year 2020 is a challenge in every possible way. Nevertheless, trends and hot topics in the development of embedded systems are evolving at a rapid pace. Whether for vehicles, aircrafts, medical devices or Industry 4.0. The all new Vector Virtual Week is a way to keep on track.
Be part of the second Vector Virtual Week from November 9 to 13.