Page navigation
- Beginning of the page
Overview of Further Accessories
Vector offers a variety of accessories. This overview helps you to find suitable accessories for your device.
Fix Kits (Wall Brackets)

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing incl. seals and screws, e.g. for mounting VN1630A or devices with the same housing height.

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing 1040 incl. seals and screws, e.g. for mounting VN1640A or devices with the same housing height.

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing 1600/1680 incl. seals and screws, e.g. for mounting devices of the VN89xx family or devices with the same housing height.
USB Protector Type 1

Protection against mechanical damages at the USB connector of VN1630, VN16130A, VN1640 or VN1640A. Use with other devices is not possible.
VNcable DSUB37

Connection cable with D-SUB37 connectors.
- Length: 1.5 m
- Connectors: 1 x D-SUB37 (male), 1 x D-SUB37 (female)
Terminal Block DSUB37

Terminal block with 37 CAGE CLAMP® connectors to D-SUB37 (requires VNcable DSUB37).
- Dimensions: 102 mm x 34 mm x 85 mm
- Weight: 102 g
- Connectors: 1 x row with 19 CAGE CLAMP® connectors, 1 x row with 18 CAGE CLAMP® connectors, 1 x D-SUB37 (female)
USB Cables
USB Cable 3.1 (Type AC with Screws)

USB 3.1 cable
- Length: approx. 1.8 m
- Connectors: 1 x connector type A, 1 x connector type C with screws
USB Cable 3.1 (Type C-C with Screws)

USB 3.1 cable
- Length: approx. 1.8 m
- Connectors: 1 x connector type C, 1 x connector type C (with screws)
USB Cable 3.0 (A-B, 1.8m)

Standard USB 3.0 cable.
- Length: approx. 1.8 m
- Connectors: 1 x connector type A, 1 x connector type B
USB Cable 3.0 (Type B Conn. with Screws)

USB 3.0 cable.
- Length: approx. 1.8 m
- Connectors: 1 x connector type A, 1 x connector type B (with screws)
USB Cable 2.0

Standard USB 2.0 cable
- Length: approx. 1.8 m
- Connectors: 1 x connector type A, 1 x connector type B
Antennas
2.4 & 5 GHz Antenna SMA-R Std.

Standard antenna for EU, USA and other non-Asian countries. Suitable for 2.4 GHz and 5 GHz applications.
2.4 & 5.2 GHz Antenna SMA-R Asia

Standard antenna for Asia. Suitable for 2.4 GHz and 5.2 GHz applications.
5.9 GHz DSRC Antenna SMA
Triton 5dBi DSRC 5.9GHz Dipole Terminal Antenna SMA(M). Hinged Connector for V2V and V2X Applications (5850-5925MHz DSRC band).
GNSS Antenna SMA
Low profile magnet mounted GPS-GLONASS-GALILEO positioning antenna.
Protection

For use with VN8900 interface family without a slide-in module (e. g. VN8950, VN8970, VN8972)

This protection kit contains two rubber bumpers which replace the standard seals of housing size 1040.
VSH Equipment
The Vector System Housing accessories consist of various mechanical components that are used to mount devices in the Vector System Housing form factor.

The Cable Guard 216 is a cable carrier system with eight clips for clamping individual cables. For cable diameters (clamping range) from Ø 3.8 mm to Ø 6.8 mm.

The Cable Guard 216 Clip is a set of four single clips for the VSH Cable Guard 216 for single cables.

The VSH Connecting Kit 19" is a mounting bracket for the 19" rack mounting. If necessary, it must be extended by the VSH Connecting Kit Horizontal.

The VSH Equipment Foot Kit is a spare part consisting of four of four replacement mounting feet.

The VSH Connecting Kit Horizontal contains mounting plates for connecting two devices side by side (horizontally).
The mounting is carried out on the front and rear of the devices.

The VSH Connecting Kit Vertical includes four small mounting plates for connecting two devices on top of each other (vertically).
The mounting is done on the left and right side of the housing.

The VSH Mounting Flange Kit consists of four mounting brackets for mounting the unit to a suitable surface.
MOST

ECL cable for VN2640.
- Length: 1.5 m
- Connectors: 1 x male 3-pin Binder connectors (type 711), 3 x stripped wires

The devices of the VN2600 Family can be connected with the MOST bus by using the Vector MOST fiber optic cable.
- Length: 1 m
- Connectors: 1 x Standard MOST 2+0 connector, 2 x POF fiber optic cables, 2 x HFBR 4531 connector

The MOST fiber optic cable can be connected to other HFBR connectors with the included HFBR coupling. For this, the fiber ends are just stuck into the couplings. To release the connection, just pull out the connectors.
Product Descriptions
- Short overview of facts (PDF)
- User Manual (PDF)