KnowledgeBase: How to configure VN1630(A) for 4 channel usage?
This article explains what settings are needed to use 4 channels on VN1630(A). The standard settings of the dip-switches on VN1630(A), if you only want to use both internal CAN piggies, are illustrated in the following photo:
If you want to use additional piggies (CAN or LIN), you have to set the dip-switches in the opposite direction:
In the Vector Hardware Configuration you get an error message (the dip-switch settings are invalid), if the dip-switches are not set correctly.
The optional CANcable2Y can split the two channels on a VN1630 SUB-D connector to two SUB-D9 connectors. On the CANcable 2Y the two channels are labeled with „CH A“ and „CH B“. The onboard CAN channel will be „CH B“ and the additional piggy will be „CH A“.
The following picture shows the CANcable2Y pin assignment in more detail:
More information is provided in the VN1600 Interface Family Manual and the VN1600 Quick Start Guide which is delivered with theVN1630(A) hardware or provided in our Download-Center.