Vector Driver Setup 11.2.2

Category : Driver/Firmware
Size : 1.19 GB
MD5 hash : 267aa392b8a7d015162e6dab4e560a3e

The setup supports the operating systems Windows 7 (32 bit + 64 bit), Windows 8.1 (32 bit + 64 bit) and Windows 10 (64 bit). You can read further information about the supported operating systems for each device in the file Drivers/readme.txt within the download package.

Note: CAN FD capable Network Interfaces with driver versions V10.x.x and later support ISO CAN FD and non-ISO CAN FD (Exception: VN5610(A) supports ISO CAN FD and non-ISO CAN FD starting with V9.8.64). For non-ISO CAN FD support of Network Interfaces with older drivers a dedicated "Vector Driver Setup non-ISO CAN FD" can be found in the download-center.

The following setups are contained:

CANcardXL
8.7.16
CANcardXLe
7.9.32 / 7.9.30 (64 bit)
CANcaseXL
8.7.16
CANboardXL
8.7.16
VH6501
10.4.18
VN0601
9.2.24
VN1530/VN1531 10.9.14
VN1610/VN1611/1630(A)/VN1640(A)
10.9.12
VN1630 log
10.4.16
VN2600/VN2610
8.8.22
VN2640
8.4.36
VN3300/VN3600
8.2.26
VN4610 11.2.20 NEW
VN5610(A)
11.2.20 NEW
VN5640
11.2.20 NEW
VN7570
10.3.18
VN7572
11.0.12
VN7600
9.9.26
VN7610
10.6.14
VN7640
10.8.2
VN8810 USB
9.3.18
VN8810 Ethernet
9.3.18
VN8900 Interface Family
10.2.136
VTP 2.4.48
VX0312
9.4.28
USB Dongle
6.63
Vector Hardware Config 11.2.20 NEW
Vector Keyman
10.1.24
Vector Platform Manager
2.5.33 NEW


CAUTION: For the devices VN8910(A), VN8911, VN8912(A), and VN8914 the drivers on the device must also be updated. To do this the device must be connected via USB. The manual "Accessories for Network Interfaces" is available for download (PDF).

Download now Previous