Vector Driver Setup 11.6.3
The setup supports the operating systems Windows 7 (32 bit + 64 bit), Windows 8.1 (32 bit + 64 bit) and Windows 10 (64 bit). You can read further information about the supported operating systems for each device in the file Drivers/readme.txt within the download package.
Note: CAN FD capable Network Interfaces with driver versions V10.x.x and later support ISO CAN FD and non-ISO CAN FD (Exception: VN5610(A) supports ISO CAN FD and non-ISO CAN FD starting with V9.8.64). For non-ISO CAN FD support of Network Interfaces with older drivers a dedicated "Vector Driver Setup non-ISO CAN FD" can be found in the download-center.
The following setups are contained:
CANcardXL | 8.7.16 |
CANcardXLe | 7.9.32 / 7.9.30 (64 bit) |
CANcaseXL | 8.7.16 |
CANboardXL | 8.7.16 |
VH6501 | 10.4.18 |
VN0601 | 9.2.24 |
VN1530/VN1531 | 10.9.14 |
VN1610/VN1611/1630(A)/VN1640(A) | 10.9.12 |
VN1630 log | 10.4.16 |
VN2600/VN2610 | 8.8.22 |
VN2640 | 8.4.36 |
VN3300/VN3600 | 8.2.26 |
VN4610 | 11.2.20 |
VN5430 | 11.4.14 |
VN5610(A) | 11.4.14 |
VN5620 | 11.4.14 |
VN5640 | 11.4.14 |
VN7570 | 10.3.18 |
VN7572 | 11.0.12 |
VN7600 | 9.9.26 |
VN7610 | 10.6.14 |
VN7640 | 10.8.20 |
VN8810 USB | 10.2.144 |
VN8810 Ethernet | 10.2.144 |
VN8900 Interface Family | 10.2.142 |
VX0312 | 9.4.28 |
VX1131 / VX1132 | 10.0.28 |
VX1135 | 10.0.24 |
VX1161.41A / VX1161.41B | 11.3.18 |
USB Dongle | 6.63 |
Vector Hardware Config | 11.4.16 |
Vector Keyman | 11.6.10 |
Vector Platform Manager | 3.5.48 NEW |
Note: The drivers for VN8900 do not support VN8910(A) anymore.
CAUTION: For the devices VN8911, VN8912(A), and VN8914 the drivers on the device must also be updated. To do this the device must be connected via USB. The manual "Accessories for Network Interfaces" is available for download (PDF).
Category : | Driver/Firmware |
Size : | 1.48 GB |
MD5 hash : | 59d51393949d6b8a7728db0d35a73206 |