Maximum Performance, Robustness and User-friendliness
for the MOST Bus Connection

VN2640 – the USB Interface for MOST150

USB Interface for MOST150

Development, simulation, testing and maintenance of MOST networks require powerful, robust and user-friendly hardware interfaces. The fast MOST interface VN2640 (for MOST150) is the ideal solution for notebook or desktop use.

Technical Data

MOST Controller OS81110
Access via Vector MediaLB+® FPGA IP-core with 8192fs (400 Mbps)
Operating modes Master, Static Master, Slave, Spy*, Bypass
Supported channels Control messages, asynchronous packets, Ethernet packets and synchronous streams
Spy* for the control and packets channel Vector Spy150-IP-core in the FPGA, can be activated individually or in parallel to all other modes and channels, amongst others recording of Preemptive-Acknowledge-Information and comprehensive bus statistics (Msgs/s; Packets/s)
Control messages Full bandwidth of the INIC applicable for Tx and/or Rx via 8192fs MLB+IP-core
Asynchronous data and Ethernet packets Full bandwidth of the INIC applicable for Tx and/or Rx via 8192fs MLB+IP-core,
packet length up to 1524 Byte for MOST packets for Rx and Tx
Master frame rates 44.1 kHz and 48 kHz selectable
PC interface USB 2.0 highspeed
MOST connector MOST 2+0, AFBR-1150L / AFBR-2150L transceiver; compliance certified
MOST ECL support Tx and/or Rx, configurable terminating resistor, 5...30V
Ambient conditions Operation: -40 °C...+60 °C
Storage: -40 °C...+85 °C
Humidity: 15 %...90 %, non-condensing
Operating systems Windows XP: 32 bit (SP3), Windows Vista: 32 bit (SP1), Windows 7: 32 bit / 64 bit
Dimensions (LxWxH) Approx. 140 x 105 x 32 mm
Power supply Startup: 7 V...50 V
Operating: 5 V...50 V, approx. 7 W
Boot time approx. 1 s
Time behavior Time stamp accuracy: 1 us; reaction time Rx => Tx: typ. <1 ms
Audio input/output Digital: optical, S/PDIF, 16 bit stereo, 44,1kHz / 48kHz with sample rate converter
Analog: 1 x line in, 1 x line out
Stress generators Light+Lock as well as message generation with free configurable payload including configurable consecutive counter on control channel, data packet channel and Ethernet packet channel
Galvanic isolation USB / Audio, power supply, SyncLine and ECL are separated from each other

Technical Documents

Related Content

Network Interfaces

Interfaces for CAN, CAN FD, LIN, J1708, Ethernet/IP, FlexRay, and MOST

Overview About the Network Interfaces

Testing tools for the implementation of simulation and test environments.

Go to Page
ECU Calibration

Measure & calibrate ECUs optimally – from A to Z!

Learn more
Tools & Services for Diagnostics

Tools & services for the complete development process.

More about Tools & Services