VN2640 – the USB Interface for MOST150

Development, simulation, testing and maintenance of MOST networks require powerful, robust and user-friendly hardware interfaces. The fast MOST interface VN2640 (for MOST150) is the ideal solution for notebook or desktop use.
Technical Data
MOST Controller | OS81110 Access via Vector MediaLB+® FPGA IP-core with 8192fs (400 Mbps) |
Operating modes | Master, Static Master, Slave, Spy*, Bypass |
Supported channels | Control messages, asynchronous packets, Ethernet packets and synchronous streams |
Spy* for the control and packets channel | Vector Spy150-IP-core in the FPGA, can be activated individually or in parallel to all other modes and channels, amongst others recording of Preemptive-Acknowledge-Information and comprehensive bus statistics (Msgs/s; Packets/s) |
Control messages | Full bandwidth of the INIC applicable for Tx and/or Rx via 8192fs MLB+IP-core |
Asynchronous data and Ethernet packets | Full bandwidth of the INIC applicable for Tx and/or Rx via 8192fs MLB+IP-core, packet length up to 1524 Byte for MOST packets for Rx and Tx |
Master frame rates | 44.1 kHz and 48 kHz selectable |
PC interface | USB 2.0 highspeed |
MOST connector | MOST 2+0, AFBR-1150L / AFBR-2150L transceiver; compliance certified |
MOST ECL support | Tx and/or Rx, configurable terminating resistor, 5...30V |
Ambient conditions | Operation: -40 °C...+60 °C Storage: -40 °C...+85 °C Humidity: 15 %...90 %, non-condensing |
Operating systems | Windows XP: 32 bit (SP3), Windows Vista: 32 bit (SP1), Windows 7: 32 bit / 64 bit |
Dimensions (LxWxH) | Approx. 140 x 105 x 32 mm |
Power supply | Startup: 7 V...50 V Operating: 5 V...50 V, approx. 7 W Boot time approx. 1 s |
Time behavior | Time stamp accuracy: 1 us; reaction time Rx => Tx: typ. <1 ms |
Audio input/output | Digital: optical, S/PDIF, 16 bit stereo, 44,1kHz / 48kHz with sample rate converter Analog: 1 x line in, 1 x line out |
Stress generators | Light+Lock as well as message generation with free configurable payload including configurable consecutive counter on control channel, data packet channel and Ethernet packet channel |
Galvanic isolation | USB / Audio, power supply, SyncLine and ECL are separated from each other |
Technical Documents
- Short overview of facts (PDF)
- User Manual (PDF)
Downloads
-
2018-12-20 Driver/FirmwareVector Driver Setup 10.9.1
-
2018-12-14 Driver/FirmwareVector Driver Setup 10.9.0
-
2018-11-14 Driver/FirmwareVector Driver Setup 10.8.3
-
2018-03-15 ManualAccessories for Network Interfaces User Manual
-
2015-05-06 Driver/FirmwareVector Driver Setup 9.1.0 (Windows XP/Vista)
-
2015-04-21 ManualUser Manual VN2600 Interface Family
-
2012-01-24 Product DescriptionFact Sheet VN2640
-
2010-11-16 Driver/FirmwareVector Hardware Flash Update Tool 3.0
News & Events
さらに表示
- 2019-02-26 - 2019-02-28 Embedded World 2019
- 2019-03-12 ウェブセミナー: CANoe/CANalyzer Option .Scope - Automated Physical Layer Analysis...
- 2019-03-13 ウェブセミナー: CANoe/CANalyzer Option .Scope - Automated Physical Layer Analysis...
- 2019-03-13 Vector Testing Seminar
- 2019-03-19 - 2019-03-20 Automotive Diagnostics 2019
- 2019-03-19 - 2019-03-20 19. Stuttgart International Symposium
- 2019-03-26 - 2019-03-27 messtec + sensor masters 2019
- 2019-03-28 ウェブセミナー: Using VectorCAST Reports for Continuous Improvement
- 2019-04-02 Vector Automotive Ethernet Symposium 2019
- 2019-04-03 Vector Cybersecurity Symposium 2019
さらに表示