VX1161

VX1161 Multi Base Module

Compact Measurement and Calibration Hardware for Multiple ECUs

Navigazione pagine

Inizio della pagina

A scalable solution with top performance, the VX1000 System is predestined for your ECU measurement and calibration tasks. It forms the interface between the ECU and a measurement and calibration tool CANape. The VX1000 System can be used in the vehicle cabin or engine bay, on test benches or in the lab. The VX1000 Base Module is connected to the PC via the standardized ASAM protocol XCP on Ethernet.

More about VX1000

What is the VX1161 Multi Base Module?

The modular and individually configurable setup makes the VX1161 Multi Base Module the ideal solution for measurement and calibration of multiple ECUs in a network. Especially when developing ADAS applications, the VX1161 Multi Base Module allows you to capture raw data and XCP data from multiple high-resolution radar sensors and XCP data from ADAS fusion ECUs in a very compact setup.
The VX1161 Multi Base Module consists of the base chassis which can be populated with a combination of Interface Cards tailored to a particular measurement use case. The Base will always be equipped with a power supply card and a host uplink card providing the connection to the measurement PC. In addition six more slots are available, which can be populated with any mix of network, POD or streaming interface cards.

For Every Application: Build Your VX1161 According to Your Requirements

Overview of Advantages

Maximum data transfer rates for high-performance measurement and calibration access to the internal data of multiple ECUs simultaneously
Significant space and cost savings with simplified installation and wiring for measuring multiple ECUs with full VX1000 functionality
Enough bandwidth for continually growing demands, for example in ADAS development, with 2 x 10 Gbit/s Ethernet uplinks to the measurement PC.
Time synchronization of all cards over IEEE 1588 PTP and Vector Hardware Sync over a SYNCcable
Delivery of customer-specific, preconfigured VX1161 Multi Base Modules with the possibility to swap out Interface Cards by the user
High flexibility and scalability in combining the Interface Cards
Sufficient performance reserves for later upgrades and extensions

Active ventilation, with slots for power supply card, host uplink card and several interface cards:

VX1161.01A Base: 6 slots for interface cards

Technical Data
Dimensions (W x D x H)	342 x 256 x 95 mm
Weight	2370 gram (no cards inserted)
Temperature Range	–40°C to +60 °C

The Power Supply Card for the VX1161 Multi Base Module is an automotive-graded power supply for all other cards. The input is protected against reversed polarity.

Technical Data
Input Voltage	8 to 34 VDC
Power Intake	20 to 125 W max. (Consumption depends on VX1161 Multi Base Module configuration, operation mode and ambient temperature) Standby: <10mA @ 12 V (typ. at room temp.)
Weight	184 g
Temperature Range	–40°C to +60 °C

Central distribution node with 10 Gbit/s Ethernet connection (RJ45) to the measurement PC. Additional Ethernet ports for cascading or connecting further hardware:

VX1161.22A Host Uplink: 2 x 10 GE and 1 x 1 GE
VX1161.22B Host Uplink: 2 x 10 GE and 4 x 1 GE

Technical Data
Power Consumption	VX1161.22A: typical 18 W (at room temp) VX1161.22B: typical 21 W (at room temp)
Weight	VX1161.22A: 407 g VX1161.22B: 453 g
Temperature Range	-40°C to +60°C

Technical Data

Power Consumption

VX1161.22A: typical 18 W (at room temp)
VX1161.22B: typical 21 W (at room temp)

Weight

VX1161.22A: 407 g

VX1161.22B: 453 g

Temperature Range

-40°C to +60°C

For connection of one VX14xx / VX15xx POD each connected via a Serial / HSSL / HSSL2 cable:

VX1161.31A Serial
VX1161.32B HSSL
VX1161.32C HSSL2

Technical Data
Power Consumption	VX1161.31A: typical 5 W (at room temp, with POD) VX1161.32B: typical 7 W (at room temp, with POD) VX1161.32C: typical 7,5 W (at room temp, with POD)
Weight	227 g
Temperature Range	-40°C to +60°C