VN7572 - the FlexRay/CAN FD/LIN Bus Connection via PCIe
The FlexRay network interface VN7572 is ideally suited for the development, simulation or testing of FlexRay networks via the PCIe interface.
The versatile channel combinations for the bus connections to FlexRay, CAN FD and LIN (K-Line) makes it an ideal interface for the laboratory or developer workstation.
Advantages
- Simulation of extensive networks due to 2 MB send memory (parallel configuration of more than 1000 messages for transmission)
- Cold start of the FlexRay cluster without needing to add a network node
- Analysis of the network startup via an independent monitoring unit
- 2 FlexRay channels (each with channel A and B)
- Updating of functional range by FPGA update possible
- Variety of channel combinations possible by simply interchangeable transceivers for different bus physics
- Optimum performance for CANoe/CANape/CANalyzer applications with CAN, CAN FD, FlexRay, LIN, J1708, and K-Line bus access
- Analog/digital IO functionality
- Connection for external time synchronization
Application Areas
- Flexible analysis of FlexRay networks and ECUs in combination with the bus systems CAN FD as well as LIN (K-Line)
- Precise time analysis of communication data
- Analysis and test of ECUs and gateway applications
- Measurement and calibration of ECUs via XCP (XCP on FlexRay, XCP on CAN).
Additionally, customer-specific applications can be created by using FlexRay-specific libraries.
Functions
FlexRay:
- Dynamic reconfiguration of the CC buffers
- Transmission and reception of data and null frames
- Detection of invalid frames
- Cycle multiplexing
- In-cycle response
- Hardware-based incrementing of a payload area
- Support of PDUs
- FlexRay gateway (channel A and B)
- Startup + asynchronous monitoring allows detection of FlexRay frames and symbols, even before the communi-cation controller has synchronized itself to the bus.
General:
- Synchronization with several devices and other bus systems (e.g. CAN(FD), LIN)
- Low PC loading due to Direct Memory Access DMA
- Very short latency times
- Support of CAN FD up to 8 MBit
- Fast CAN flashing through hardware-based flash sequence support
- Extended LIN stress functions, e.g. for LIN 2.1 confor-mance tests
Product Descriptions
- Short overview of facts (PDF)
- Manual (PDF)
Show more
VN7572 | ||||
Channels / channel combinations | FlexRay | CAN FD | LIN/K-Line | |
1 | 7 | - | ||
1 | 6 | 1 | ||
1 | 5 | 2 | ||
2 | 6 | - | ||
2 | 5 | 1 | ||
2 | 4 | 2 | ||
- | 8 | - | ||
- | 7 | 1 | ||
- | 6 | 2 | ||
- | 5 | 3(3) | ||
- | 4 | 4(3) | ||
Transceiver(1) | FR-, CAN(FD)-, LINpiggies, analog/digital IO functionality with IOpiggy available (1) | |||
FR Comm. Controller analysis startup | Bosch E-Ray (FPGA) Bosch E-Ray (FPGA) | |||
Send memory | 2MB | |||
FlexRay Cluster (A+B) | 2 | |||
PC interface | PCIe | |||
Trigger (inputs/outputs) | 1 (with FRpiggy 1082cap) | |||
Analog/digital IO functionality | I0piggy8642 digital: 8 inputs, 6 outputs / analog: 4 inputs, 2 outputs | |||
Connector | 1 x D-SUB62(2) | |||
Power consumption | 7 W | |||
Operating systems | Windows 10 64 bit, Windows 7/8.1 (32 and 64 bit) | |||
Driver libraries | XL Driver Library | |||
Temperature range, operating: storage: | -30...+50°C -40...+85°C | |||
Dimensions (LxWxD) | 181 x 127 x 22 mm | |||
(1): Detailed listing of all transceivers see the transceivers overview
(2): Breakoutbox or 9-fold Y-cable with 8 x D-SUB9 (FlexRay, CAN(FD), LIN) and 1 x D-SUB15 (IO) as accessory available (3): max. 2 x K-Line channels available
(3): max. 2 x K-Line channels available
Show more
Do you have technical questions and are looking for suitable answers? Our KnowledgeBase provides the most important!
Show more
Downloads
-
2020-04-17 Driver/FirmwareVector Driver Setup 11.3.0
-
2019-03-29 Driver/FirmwareXL Driver Library 11.0.14
-
2016-06-24 Add-On/Freeware Product DescriptionVN7572 3D CAD Model (STP)
-
2015-05-06 Driver/FirmwareVector Driver Setup 9.1.0 (Windows XP/Vista)
News & Events
Show more
- 2020-06-02 Webinar: Simplifying the Analysis, Simulation and Testing of Complex...
- 2020-06-04 Webinar: VectorCAST: How VectorCAST Integrates with Your Software Testing...
- 2020-06-09 Webinar: The Test Designers Toolbox
- 2020-06-09 Webinar: VectorCAST: Medical Device Software under MDR – A Regulatory...
- 2020-06-16 Webinar: Introduction to Integration and Test of AUTOSAR Systems
- 2020-06-17 Webinar: Introduction to Run-time Measurement and Calibration of ECUs with...
- 2020-06-18 Webinar: CANdelaStudio – Authoring Tool for ECU Diagnostic Specification
- 2020-06-18 Webinar: VectorCAST: Combining Dynamic Testing and Static Analysis for ISO...
- 2020-06-22 Webinar: VectorCAST: AI, ML and "Classic" Control Systems - Traceability...
- 2020-06-23 Webinar: Automated Testing of Diagnostic Protocol Implementation and...
Show more
