CAN, LIN and K-Line Cables
Get an OverviewPage navigation
- Beginning of the page
CAN, LIN and K-Line Cables Overview
Vector offers a variety of cables for your CAN, LIN and K-Line hardware. CANcable are available individually or as a set. This overview helps you to find suitable cables for your device.
CANcable Set Pro
The cable set for CAN/LIN contains:
- 1x CANcable0
- 1x CANcableY
- 2x CANcableA
- 2x CANterm120
- 2x Gender changer male/male
- 1x Gender changer female/female
CANcable 2Y
Y cable for Vector CAN/LIN interfaces with D-SUB9 double assignment (VN1600 interface family, VN8970 etc.). Splits the double assignment into two separate D-SUB9 connectors (CH A and CH B).
- Length: 0.3 m
- Connectors: 1x female D-SUB9 connector, 2x male D-SUB9 connectors
CANcable0
CAN/LIN connection cable.
Note: When using with devices that have a primary and a secondary D-SUB9 pin assignment, only the primary channel is accessible.
- Length: 0.3 m
- Connectors: 2x female D-SUB9 connectors
- Properties: Without terminating resistors
CANcable1
CAN connection cable.
Note: When using with devices that have a primary and a secondary D-SUB9 pin assignment, only the primary channel is accessible.
- Length: 0.3 m
- Connectors: 2x female D-SUB9 connectors
- Properties: Two parallel 120 Ohm terminating resistors
CANcableY
Y extension cable for CAN or LIN.
- Length: 2 m (overall length)
- Connectors: 3x female D-SUB9 connectors
- Properties: Including gender changer
- Only available with CANcable Set Pro
CANterm120
CAN adapter for high-speed CAN buses.
Note: When using with devices that have a primary and a secondary D-SUB9 pin assignment, only the primary channel is
accessible.
- Connectors: 1x female D-SUB9 connector, 1x male D-SUB9 connector
- Properties: One 120 Ω terminating resistor
CANcableTnT
CANcableTnT: Connection cable for Truck & Trailer (ISO 11992) and CAN, LIN, K-Line.
- Length: 1.5 m
- Connectors: 1x female D-SUB9 connector, 4x bunch plugs
- Properties: Without any termination
CANcableTnT Term
Connection cable for Truck & Trailer (ISO 11992).
Intended use: with CANpiggy 10011opto only.
- Length: 1.5 m
- Connectors: 1x female D-SUB9 connector, 4x bunch plugs
- Properties: With termination acc. ISO 11992 when used with CANpiggy 10011opto
CANcableA
CAN/LIN connection cable.
- Length: 0.5 m
- Connectors: 1x female D-SUB9 connector, 4x stripped wires
- Only available with CANcable Set Pro
VNcable 3Y
Y cable for Vector FlexRay/CAN/LIN interfaces with D-SUB15HD triple assignment. Splits a D-SUB15HD connector into three separate D-SUB9 connectors (CH A, CH B, CH C).
- Length: 0.3 m
- Connectors: 1x female D-SUB15HD connector, 3x male D-SUB9 connectors
VNcable DSUB62
Connection cable with D-SUB62 connectors for Breakout Box D62Y9, VN7570 and VN7572.
- Length: 0.5 m (cable only), 0.6 m (overall length)
- Connectors: 1x D-SUB62 (male), 1x D-SUB62 (female)
VNcable DSUB62 A
Connection cable with D-SUB62 connectors for Breakout Box D62Y9, VN7570 and VN7572.
- Length: 1.2 m (cable only), 1.3 m (overall length)
- Connectors: 1x D-SUB62 (male), 1x D-SUB62 (female)
VNcable DSUB62 B
Connection cable with D-SUB62 connector and open end.
- Length: 2 m (overall length)
- Connectors: 1x D-SUB62 (female), 62x wires
VNcable D62Y9
Adapter cable for VN7570 and VN7572.
- Length: approx. 0.5 m (overall length), approx. 0.4 m without connectors
- Connectors: 1x D-SUB62 (female), 1x D-SUB15 (female), 8x D-SUB9 (male)
FR/CANcable 2Y
Y cable for Vector FR/CAN interfaces with D-SUB9 double assignment, specifically for VN7610. Splits the double assignment into two separate D-SUB9 connectors.
- Length: 0,3 m
- Connectors: 1x D-SUB9 (female), 2x D-SUB9 (male)
Breakout Box D62Y9
Breakout box for VN7570 and VN7572 (requires VNcable DSUB62 or VNcable DSUB62 A).
- Dimensions: 165 mm x 52 mm x 69 mm (W x H x D), incl. rubber feet and connectors
- Weight: 580 g
- Connectors: 1x D-SUB62 (female), 8x D-SUB9 (male), 1x D-SUB15 (female)
- Properties: Can be mounted with 4x M4 screws
Product Description
- User Manual (PDF)
