With Service Pack 3, the following changes become effective:
Direct import of all supported message-oriented logging formats is now possible
Multiple symbols can now be activated or deactivated together via a group
Groups can be controlled via CAPL functions
The tooltip of the measurement and difference cursors also displays the symbolic value
Performance improvements of the drawing routine
ASCI loggings contain a unique ID of the measurement to be able to navigate from the Test Report Viewer
Meta data are now also written to MDF/MF4 files
In the configuration of the offline mode several files can now be activated and deactivated at the same time
Ribbon Bar for easy access to security relevant components:
A separate ribbon bar is created for each security package.
New look and feel of Security Manager
Support of weak Cipher Suites with SHA hashing, e.g. TLS_ECDHE_ECDSA_WITH_NULL_SHA
Connection of TLS/DTLS Observer from CANoe to Security Manager to use PKI profiles for PreShared Keys
CANoe CAPL DLL for reading X509 certificates
CAPL functions for reading various attributes, such as Name, ValidFrom….
Diagnostic Feature Set
Support of timing parameters "P2 Server" and "P2 extended Server" in the Diagnostics/ISO TP configuration dialog
New standard diagnostic descriptions GenericUDS und GenericUDSLIN supporting service $29 (Authentication)
Improved behavior with functional requests while Tester Present is activated and for extended addressing
Improved behavior in case of Tester Adapter uses dedicated IP address
Corrected source and target address in Diagnostic Message Negative ACK PDUs
Correct evaluation of send flag (RX/TX) in trace window
Port-based Network Access (starting with VN firmware version 11.1):
Automatic conversion of configurations utilizing channel-based network access into configurations utilizing port-based network access.
Automatic creation of necessary ports when switched to port-based network access.
Networks, measurement ports and simulation ports from the Ethernet device configuration are provided in the Port Configuration dialog.
At the start of measurement start the networks from the Ethernet device configuration are provided if necessary.
Trace Window - Analysis Filter (Ethernet, AVB, IP, SOME/IP and SOME/IP SD): Network and ports may be configured.
Signals can be qualified with a port name. The Symbol Explorer provides the available ports for this purpose.
Global Options: The update behavior for signals without qualified port can be configured.
CAPL: Additional functions ethIsPortBasedNetwork and ethGetEthernetPort.
Configuration templates: Additional templates for port-based network access.
Analysis Filter: Values can be modified in SOME/IP Filter.
Detail View: Improved display of WebSocket and JSON.
Fix an issue which may cause erroneous display of protocol violations in case of PTP packets.
SOME/IP: In case the length field does not fit to the available data, this is reported in column Protocol Validation.
Fix a display issue with Signal Protocol DLL and column 'Payload Data'.
Sleep/Wakeup support: New functions ethGetPhyState and ethSetPhyState (on supported Ethernet network interfaces).
UdpSendTo with variants for IP_Endpoint.
New method TcpSocket::Abort.
TCP/IP Stack: Fix an issue which prevents the access to payload in case of a piggyback FIN transmission.
Fix an issue with function OnIpSendPrepare which prevents the return of a socket handle.
AVB / Media Stream Control: Detection of incomplete FU_A transmission of an H.264 NALU to allow the display of incomplete images / image parts.
On insertion of an additional Ethernet network, the CANalyzer TCP/IP stack uses the MAC ID of the assigned Ethernet network interface as default.
Ethernet Network Monitor: Fix an issue which leads to the multiple display of services.
Bus Statistics / Offline Mode: Fix an issue which leads to inappropriate calculations based on the link speed of Ethernet network interfaces.
Fallback solution for SOME/IP TP with SessionID = 0.
Stability improvements related to the reception of malformed IPv6 packets.
Stability improvement related to the reception of TCP packets with wrong data offset.
Stability improvement related to rename a network in connection with SOME/IP and configured signals.
Stability improvement related to PTP AUTOSAR TLV interpretation.
Fix an issue related to HTTP Observer and large PDUs.
NetIsolator: Fix an issue which prevents some network adapters from being listed.
Logging/Logging File Conversion: Fix an issue which may lead to the output of causeless warnings concerning unsupported events, when writing to PCAP/PCAPNG.
The interface to connect a non-Vector 802.11p communication device and the according communication software (daemon) offered at the Vector homepage are no longer actively supported from version 12.0. As of CANoe version 13.0, the interface is no longer supported.