CANoe 11.0 SP3 (64 bit)

Category: Service Pack
The download is not protected.
Size: Size: 1.96 GB
MD5 hash: c3abe7f34903a574ad916850da7c2f3b

With Service Pack 3, the following changes become effective:

General

  • Symbol Explorer

    • New column “unit” for all symbols
    • The partially cancelling of the search is visualized better now

  • In offline mode, the channel mapping can be set flexibly per file.
  • The standalone mode dialog has been revised. A new plug-in for the Platform Manager provides the basic functions for standalone mode.
  • The system variables dialog allows the configuration of the write access in case of Multi-CANoe.
  • The CAPL function graphicsWindowFit works correctly now when the Graphics Window is closed
  • Panel Designer

    • If the text of the description of the Input/Output Box is too long, you can select whether the start of the text or the end of the text should be displayed
    • The “Text and Control function” aligns controls (Input/Output Box, Combo Box, Check Box, Radio Button) and adjusts the width of the label and element
    • Switch values from value tables can be assigned for the Button, Check Box, LED Control, Media Player, Radio Button, and Switch/Indicator controls

  • Support of ASAM XIL API v2.1.0
  • ASR Explorer

    • Read Only text fields can be copied from property view
    • When deleting signals not needed signal triggerings will be removed

Addons

  • The Autosar Interaction Layer supports General-Purpose-I-PDUs and General-Purpose-PDUs.
  • Toyota Message IDs are supported in standalone mode.

Diagnostic Feature Set

  • Improved Support of 4K displays and reworked design of the diagnostic windows
  • Improved robustness:

    • of test modules in combination with DoIP
    • when logging in the pre-filter branch
    • when applying invalid parameter values for the parameter ALFID for service $2C $02 requests (Dynamically Define Periodic Data Define By Address)

  • Deactivation of TesterPresent is working now with FlexRay in combination with diagnostic descriptions configured as FGR
  • The OBD window is now correctly updated after resizing it
  • In an ODB-II configuration for 29bit CAN Identifier at 500kB baud rate, flow control messages are now sent with the correct timing
  • Improved Support of diagnostic descriptions with Japanese translation
  • Improvements in the Diagnostics/ISO TP dialog on Japanese systems and regarding diagnostic descriptions configured for FlexRay as FGR
  • Improved handling of parameters which are defined across byte boundaries

Test Feature Set

Together with vTESTstudio 3.0 SP3:

  • Support of “profiles” for variant property settings: a profile corresponds to one set of variant property values; you can define as many profiles as you want and switch between them easily.
  • Specific filter on control flow commands in the Test Report Viewer enable hiding of control flow test steps as “For Each loop” and If/Else statements.
  • By a surrounding element in the report, all iterations of a loop can now be collapsed / expanded together.
  • Interface functions can now have input parameters of type “runtime message”. For example, a CAPL function with an input parameter of type message* can be called within the Test Table Editor.
  • Definition of dedicated check points in the Waveform Editor to easily realize synchronized checks related to a stimulation curve.
  • The Connection Utilities for IBM DOORS NG/RQM, Siemens Polarion ALM and PTC Integrity can be automated via command line.

CAN interactive generator:

  • Triggering on frame reception is possible
  • Triggering on System Variable update or change is possible

Security

  • Security Example configurations are displayed in CANoe in the Sample Configuration area (File->Sample Configurations).
  • New/Advanced Security CAPL functions for fault injection (Freshness, Keys) and control
  • Transport Layer Security (TLS): Extended dialog for security configuration: Assignment of different PKI security profiles to TCP/IP stacks.              
  • Backend communication on RT systems (VN89xx, VT60xx, RT Racks)

    • Requests to the OEM backend are forwarded to the user PC via a secured channel.
    • The OEM Security package must support this communication.

SOA (service oriented architectures)

  • Rework of the Communication Setup window and corresponding dialogs

    • All configuration dialogs have a maximize button now
    • In the configuration dialog for endpoints you can select for which objects C# libraries will be generated

  • Automation via COM interface
  • Support of vCDL (Vector Communication Description Language), a domain specific language for the description of communication
  • Improvement of the Trace Windows columns Dir, Src and Dest for Communication Objects
  • Support of signal groups
  • Improvements of the Communication Object Editor

    • Change of the order of data members, PDU signals as well as struct and union members via drag & drop
    • It is possible to create and edit PDU timings now

Option .LIN

  • LIN Interactive Scheduler allows to configure valid sync break limits
  • J2602 conformance tests:

    •  The VH1150 test hardware automatically adjusts changing voltage levels

  • LDFExplorer: The Consistency Checker validates now J2602 frame ID ranges

Option .FlexRay

  • Container PDUs are efficiently assembled on the network interface. The function is activated via an INI switch.

Option .Ethernet

  • Support of VT6306 Hardware
  • Support direct access to Ethernet protocol fields from CAPL without usage of the Ethernet_IL.DLL
  • Support of WebSockets
  • Support of SOME/IP PDUs in simulation with a length > 64 kbyte
  • Support of dynamic assigned UDP ports of AUTOSAR PDUs for a server
  • Support of TestWait/Get/JoinForEthernetPacket()-Functions
  • Support access to the simulated Node title with .Net at runtime
  • Support access to SOME/IP Service Signals with FDX
  • Support Last-is-best Trigger of Ethernet AUTOSAR PDUs
  • Improved support for static configured routes in SOME/IP
  • Improved display of hexadecimal TCP/UDP Port numbers at the Trace Window
  • Improved interpretation of the TLS-Handshake
  • Improved behavior of AVB-IL.DLL when switching the Port role from Master to Slave at runtime
  • Showing additional information like VLAN-ID and others of an Ethernet AUTOSAR PDU in the Trace-Window
  • Support of VLAN for AUTOSAR PDUs in the Test Feature Set for Request/Response Checks
  • Change behavior of the “ASR4_Ethernet” Template to apply the configuration of the Ethernet Interface
  • Support signal access for UDP-NM-PDUs
  • Stability improvements on the Ethernet Network Monitor
  • Fix an issue in the SOME/IP-IL which prevents a response to a FindService with instance ID = 0xFFFF
  • Fix an issue in the SOME/IP-IL with the calculation of the header size which may lead to a misinterpretation of the following data bytes
  • Fix an issue of the IP Timestamp option of the TCP/UDP/IP-Stack
  • Fix an issue which may cause that the test function “AwaitValueMatch“ does not support AUTOSAR PDUs
  • Fix an issue in the CANalyzer TCP/IP Callback API which may prevent write access to System variables
  • Limitation of the Ethernet packet size to 14 to 1612 Byte when using the on-board Ethernet interface (not VNxxxx) of the PC
  • Fix an issue of the Network hardware dialog which may display a wrong image of an Ethernet interface
  • Fix an issue of the Ethernet channel assignment of a VN8914 Hardware where the channel number does not match the number of the panel
  • Fix an issue which may cause compiler errors in CAPL when using the function GetVLan()
  • Fix an issue at the TCP/UDP/IP-Stack configuration dialog when deleting a VLAN which may cause that the wrong VLAN configuration will be removed
  • Stability improvement when using the CAPL function ArEthGetSecurityValidationState() not within the callback function OnArEthProcessRxMessage()
  • Improved interpretation of the DoIP protocol when using TCP
  • Fix an issue at AUTOSAR PDUs while transmitting a secured AUTOSAR PDU which may cause the transmission of a wrong Alive counter
  • GUI improvement at the Trace Window to limit the list of offered Predefined Filters
  • Fix an issue at the IP Filter which offers invalid filter options

Option .AMD/XCP

  • New columns “Type”, “Data Type”, “Unit”, Minimum”, and “Maximum” in the parameter list for easier identification of parameters
  • Read only parameters are marked as such using the icon of the name column
  • The ASAP2 Updater can now be started via the ribbon bar
  • The new ASAP2 Studio Viewer for viewing A2L files is installed with the 64bit version of CANoe now
  • Parameter list of the XCP/CCP Window: The column filters offer selection of multiple values now. This allows displaying parameters from several folders simultaneously.
  • EPK check is now available for CCP devices, too.
  • Improvements of the XCP trace observer

    • XCP version number is correctly decoded now
    • Time stamps for XCP on Ethernet are now displayed consistently and are calculated correctly
    • The activation setting of the observer is now preserved when changing the A2L file

  • New setting “ODT Optimization” to disable the optimization by address
  • Improved import of CANape project settings
  • Improved import of value tables
  • The state of the Trace Window filter for XCP messages is now retained on renaming the device or changing the A2L file
  • The TCP/IP stack of the selected simulation node is used correctly in all situations

Option .Car2x

  • [VN4610]

  • [Car2x Security]

    • Improvements for generating certificates due to ETSI TS 103 097 V1.3.1
    • New PSIDs are supported
    • Type “bitmapSsp“ defined in IEEE1609.2 supported

  • [Car2x Scenario Editor]

    • Improvements at GUI and CAPL

  • [Car2x IL]

    • Access Acceleration attribute in CAPL

  • [Car2x Application Events]

    • Support of multiple BSM / PartII (1..7) array positions

Option .J1939

  • J1939 Interaction Layer

    • Improved support of the J1939 Transport Protocol for dynamic address setting
    • New functions for error injection: J1939IL_ManipulateMessage(), J1939IL_BlockRxMessage() und J1939IL_BlockTxMessage()

  • Trace Window

    • Better interpretation of consecutive RTS messages
    • Correct comment presentation at J1939 Wide Events

  • GB/T 27930 Analysis in trace window (requires Smart Charging option)

    • Clear and compact presentation of the message flow
    • Interpretation of each individual GB/T 27930 message

  • J1939-82 Compliance Test (2015)

    • Better implementation of Tables 4 to 7
    • Improved description of test strategy in online help

Option .ISO11783

  • Tractor Implement Management (TIM)

    • Support of the current TIM specification (AEF 0.23 version 16) in ISO11783 IL
    • Sample configuration ISO11783TIMServerAndClient (TIM Simulator) supports multiple TIM clients simultaneously
    • Improved interpretation of TIM messages in trace window

  • J1939 Scanner

    • Support of messages PII (Product Identification Info) and CFF (Control Function Functionalities)

  • Virtual Terminal window

    • Comfortable and intuitive navigation between objects on the "Object Pool" page
    • Extended implementation of the requirements of ISO11783-6 (version 5)

  • Interactive Task Controller

    • Filtering of the visible Device Properties and Process Data Objects
    • Convenient sending of measurement commands „on time“,“on distance“, „on threshold “, “on change”

  • Trace Fenster

    • Improved interpretation of TIM messages
    • Intuitive visualization of states of individual sections (Section Control)

  • ISO11783/VT/TC Interaction Layers

    • New functions for error injection:
      ISO11783IL_ManipulateMessage() / VTIL_ManipulateMessage() / TCIL_ManipulateMessage(),
      ISO11783IL_BlockRxMessage() / VTIL_BlockRxMessage() /TCIL_BlockRxMessage()  und
      ISO11783IL_BlockTxMessage() / VTIL_BlockTxMessage() / TCIL_BlockTxMessage();

Option Scope

  • Support of oscilloscope Vector PicoScope5444D-034.

    • For usage with CANoe/CANalyzer the Option .Scope is needed.
    • The scope can also be used with standard software from manufacturer PicoTech.

  • Vector PicoScope 5444D-034 with 4 analog channels and 200 MHz bandwidth
  • Fast data transfer with USB 3.0
  • USB-powered for 2 channels (1 CAN/FR or 2 LIN/IO)
  • External power supply needed for 4 channels (2 CAN/FR or 4 LIN/IO)
  • 500 MS/s sampling rate (for 2 channels) with up to 512 MS buffer
  • Network connection via Scope Bus Probe (x10) with DSUB bus connector
  • Time synchronization via Scope Trigger Y-Cable with Vector HW sync connector

Option Sensor

  • I2C Support:

    • Detailed analysis of I2C communication
    • Simulating I2C master / I2C slave
    • Support of 7 and 10 bit addressing
    • Voltage levels are configurable
    • Support of the I2C modes:

      • Standard Mode:                0,1 Mbit/s
      • Fast Mode:                         0,4 Mbit/s
      • Fast Mode Plus: 1,0 Mbit/s

  • Support of SENT with inverted levels

Option Smart Charging

  • ISO15118 & DIN70121

    • Simulation of the electric vehicle and the charging station
    • Analysis and Monitoring

      • Man-in-the-middle and Offline Analysis of the charging communication
      • Interpretation of messages in the Trace Window

    • Support of the SLAC and Vehicle2Grid protocols
    • Transport Layer Security (TLS) via Security Manager (only ISO 15118)

      • TLS communication with automated encrypt/decrypt
      • Support of Public Key Infrastructure (PKI) and certificate management

  • GB/T 27930

    • Analyseis in the Trace Window

      • Clear and compact layout of the message flow
      • Interpretation of each single GB/T 27930 message

VT System

  • Support of VT6306 (Ethernet Interface Module)

    • 6x automotive ethernet channels on specific piggy board (separate article)
    • 100BASE-T1 piggy (from 11/2018)
    • 1000BASE-T1 piggy (from Q2/2019)
    • Shortcuts between signal lines and to Vbatt./GND
    • Line breaks switchable
    • Variable signal damping with resistance cascade on 3 channels
    • Additional 2x general purpose 100/1000 Mbit/s ethernet channels
    • Link to RT Host PC via PCI Express cable like VT6104A / VT6204


More about CANoe... 

Download now Previous