Vector Driver Setup 10.7.1

Category: Driver/Firmware
The download is not protected.
Size: Size: 471.03 MB
MD5 hash: c3e0a244287638e83960a6e078d6726c

The setup supports the operating systems Windows 7 (32 bit and 64 bit), Windows 8.1 (32 bit and 64 bit) and Windows 10 (64 bit). You can read further information about the supported operating systems for each device in the file Drivers/readme.txt within the download package.

Note: CAN FD capable Network Interfaces with driver versions V10.x.x and later support ISO CAN FD and non-ISO CAN FD. For non-ISO CAN FD support of Network Interfaces with older drivers a dedicated "Vector Driver Setup non-ISO CAN FD" can be found in the download-center.


The following setups are contained:

CANcardXL
8.7.16
CANcardXLe
7.9.32 / 7.9.30 (64 bit)
CANcaseXL
8.7.16
CANboardXL
8.7.16
VH6501
10.4.18
VN0601
9.2.24
VN1610/VN1611/1630(A)/VN1640(A)
10.4.14
VN1630 log
10.4.16
VN2600/VN2610
8.8.22
VN2640
8.4.36
VN3300/VN3600
8.2.26
VN5610(A)
9.8.64   NEW
VN5640
10.7.14   NEW
VN7570
10.3.18
VN7572
10.3.18
VN7600
9.9.26
VN7610
10.6.14
VN7640
10.1.24
VN8810 USB
9.3.18
VN8810 Ethernet
9.3.18
VN8910(A)/VN8911/VN8912(A)/VN8914 USB
10.2.12
VN8910(A)/VN8911/VN8912(A)/VN8914 Ethernet
10.2.14
VN8950
8.0.48
VN8970
10.3.18
VN8972
10.3.18
VX031
9.4.28
USB Dongle
6.63
Vector Keyman
10.1.24
Vector Platform Manager
1.5.27   NEW

CAUTION: For the devices VN8910(A), VN8911, VN8912(A), and VN8914 the drivers on the device must also be updated. To do this the device must be connected via USB. The manual "Accessories for Network Interfaces" is available here (PDF).

Download now Previous