VT2816A | VT2816A FPGA
General-Purpose Analog I/O Module
The module VT2816A provides 12 inputs and 4 outputs for analog signals. They may be connected directly to the inputs or outputs of an ECU. Also, other digital signals can be measured or controlled using this module, e.g. to control additional parts of a test bench. This module is also available as a variant (VT2816A FPGA) with user programmable FPGA.
Characteristics:
VT2816A
Functions for Each Channel
- Voltage measurement with 2 measurement ranges
- Differential or single-ended inputs (switchable)
- Alternative current measurement with integrated shunt (eight channels)
- Calculation of instantaneous, average, and effective values from the raw measurement values of the A/D converter; access to these values within CANoe
Functions for Each Output Channel
- Voltage output with 2 switchable output ranges
- Differential or single-ended output (switchable)
- Autonomous output of a voltage curve loaded into module
Technical Data
VT2816A | ||
Voltage measurement | ||
Input Voltage (2 measurement ranges) | -10 V … +10 V or -60 V … +60 V | |
Input resistance | Min. 1 MΩ | |
Accuracy (at 25 °C) | ||
– Measurement range ±10 V | ± 10 mV | |
– Measurement range ±60 V | ± 50 mV | |
– A/D converter (per channel, internal) | 16 Bit / 250 kSamples/s | |
Current measurement | ||
Measurement range | -4.5 A … +4.5 A | |
Common mode voltage | -60 V … +60 V | |
Accuracy (at 25 °C) | ± 50 mA | |
A/D converter (per channel, internal) | 16 Bit / 250 kSamples/s | |
Voltage output | ||
Output voltage (2 output ranges) | -10 V … +10 V or 0 V … 28 V | |
Output current | Max. 200 mA | |
Accuracy (at 25 °C) | ||
– Output range ±10 V | ± 15 mV | |
– Output range 0 … 28 V | ± 15 mV | |
Slew rate (resistive load, 20 mA) | Typ. 15 V/µs | |
D/A converter (per channel) | 16 Bit | |
Basic Data | ||
Supply voltage (via backplane) | 12 V ±10% | |
Power consumption | Typ. 4.9 W | |
Temperature range | 0 … 55 °C | |
Dimensions (L x W x H) | 300 x 173 x 36 mm | |
Weight | Approx. 490 g | |
Maintenance | ||
Calibration recommended | every 12 months | |
Accredited (pre/re) calibration according to | ISO/IEC 17025:2017 |