Ethernet technology is used for in-vehicle communication, measurement and calibration, diagnostics via DoIP and communication between electric vehicles and charging stations. Further drivers for in-vehicle Ethernet are the upcoming ADAS functions for automated and autonomous driving as well as infotainment use cases. Ethernet is also used as a data backbone, connecting the different communication domains of an E/E architecture.
Vehicle manufacturers and suppliers are faced with a wide range of challenges, e.g. introduction of service-oriented communication. Security aspects also play an important role. Vector supports you with all kinds of professional tools, basic software, trainings and services.
Mature products and competent services through years of experience in automotive networking
Support of all relevant physical layers, e.g. 100BASE-T1 (former OPEN Alliance BroadR-Reach), 1000BASE-T1, 100BASE-TX, ...
Consistent multibus tool chain for simple integration of new technologies into existing vehicle architectures
Practical solutions through participation in committees such as e.g. OPEN Alliance and AUTOSAR as well as intensive cooperation with the users
The Vector Ethernet toolchain helps to simplify the design, implementation and test of todays in-vehicle distributed systems utilizing Ethernet.
PREEvision supports the AUTOSAR compliant design of Ethernet networks and clusters including the corresponding communication. The model-based engineering environment also enables service-oriented architectures for embedded software systems.
Designing the architecture of software components (SWCs) for AUTOSAR ECUs. This tool lets you create a graphic design of the interfaces, define the internal behavior with runnable entities and link the SWCs to one another.
Remaining network simulation across communication systems with one tool.
In addition to many other modules, MICROSAR - Vector's AUTOSAR basic software - also includes modules for Ethernet-based communication in vehicles. These modules let you develop your ECUs efficiently and reliably.
The MICROSAR.ETH package contains the AUTOSAR BSW modules including a TCP/IP stack developed to an automotive standard for Ethernet-based communication between ECUs. TheBSW modules of MICROSAR.ETH are available according to AUTOSAR 4.x and as a supplement to AUTOSAR 3.x.
MICROSAR.AVB (Audio/Video Bridging) enables quick and reliable transport of audio/video data. It is based on AUTOSAR 4.x and supports AVTP (Audio/Video Transport Protocol), RTP (Transport Protocol for Real-Time Applications), SRP (Stream Reservation Protocol), EthTSyn (Time Synchronisation over Ethernet) and on request also BMCA (Best Master Clock Algorithm). This makes it possible to implement AVB end points as well as bridge functionality.
DaVinci Configurator Pro is the central tool for configuring, validating and generating the basic software (BSW) and the run-time environment (RTE) of an AUTOSAR ECU. You can use this tool for MICROSAR modules from Vector as well as for your own BSW.
Small Series Production ECUs
Vector Controllers are ECUs that can be used universally for vehicle communication. They are perfect for rapid development of functional samples and use in small series productions. The ECUs cover a broad range of applications. You can get an optimal solution for your needs from the scaled product family and by ECUs with reduced PCB population.
The Vector Controllers in the automotive product family have been conceptualized for use in 12 V electrical systems. Starting with gateways and extending to domain controllers, the product family lends itself to a broad spectrum of potential use cases.
The VC36B-12 is a high performance automotive Ethernet gateway. With five 100BASE-T1 (BroadR-Reach) channels, one 100BASE-TX channel and interfaces for CAN (FD) and LIN it is well-suited for many gateway applications and backbone architectures. It is also appropriate as information highway and driver assistance (ADAS) controller in the automobile.
The universal ECU VC121-12 offers many communication interfaces for CAN, LIN, FlexRay and Ethernet as well as IO interfaces. Therefore it is ideally suited as gateway ECU.
Analysis and Testing
Automotive Ethernet is a switched network compared to the bus systems used in the automotive field. Special approaches for analyzing and testing networks are required. They include access to the network as well as the capturing of the entire communication.
Remaining bus simulation across networks and testing of ECUs and entire networks with one tool. The option Ethernet comprises protocols like SOME/IP, AVB/TSN, DoIP and more as well as the network technology Ethernet.
Many example configurations, e.g. for the OPEN Alliance Conformance Tests (TC8), are included. (Details: see AppNote)
The interfaces of the VN5000 family are compact and very powerful interfaces for the analysis of Ethernet networks and for simulation and test tasks in the Ethernet environment. They are suitable for synchronous Ethernet monitoring together with other bus systems, network participation e.g. in simulations, and for frame, load and error generation in tests. The interface to the computer is realized via Ethernet or USB.
Modular test environment for efficient ECU and functional tests. When used together with CANoe, the VT System becomes a high-performance and flexible test solution.
For the execution of the Open Alliance Conformance Tests (TC8), the VT System allows a high level of test automation including some physical layer tests. (Details: see AppNote)
Measurement and Calibration
The following products from Vector enable calibration, measurement and (re)programming of individual ECUs via XCP on Ethernet (e.g. 100/1000BASE-T1) and access to Ethernet data and higher protocols such as SOME/IP.
Measuring, calibrating and (re)programming over XCP or microcontroller-specific data trace and debug ports. CANape and VX1000 enable maximum transmission rates with minimal or no impact on ECU run-time.
The system provides the interface between the ECU and a measurement and calibration tool like CANape. For high data throughput with minimal runtime influence on the ECU, data access is done via microcontroller-specific data trace and debug interfaces.
Network interface for (Automotive) Ethernet and CAN (FD). ECUs can be quickly and reliably connected to a computer with CANape using XCP on Ethernet without the need for complex configuration of a firewall.
AUTOSAR basic software modules for measuring, calibrating and (re)programming via XCP on Ethernet.
The challenge in logging Ethernet data is the high data rate, e.g. in the development of ADAS systems. The Vector solution CANape log with the logger platforms VP6400 and VP7400 is capable of recording large amounts of data from different sources synchronously. This enables you to record sensor data, complex protocols such as SOME/IP, ground-truth data and much more. Via the Vector network interfaces you have access to CAN (FD), Automotive Ethernet and FlexRay. The VX1000 product family gives you access to all raw and debugging data of sensors and to all ECU internal values.
For recording ADAS data the new logging solution CANape log from Vector is available. It enables users to record all data from sensors, networks, complex protocols and internal ECU data. The solution scales with increasing requirements and can be operated intuitively. One click is all it takes to start, stop and monitor preconfigured logging via mobile devices.
In the interactive mode a laptop with CANape is coupled to the logger hardware. This gives you access to the full range of CANape functions without having to change the wiring in the vehicle. This allows you to use your CANape project unchanged in development and also directly in vehicle testing. Additionally, you can create logger configurations with CANape that are then executed by CANape log.
The VP6400 and VP7400 hardware platforms are specially designed for the time-synchronous parallel recording of Ethernet data streams, such as video streams, radar raw data, XCP on Ethernet and bus messages in automobiles. It supports exchangeable storage cartridges with up to 4 resp. 16 TByte SSD memory. With the very high recording rates of up to 500 MByte/s or up to 1 GByte/s they are suitable for use in ambitious Ethernet and ADAS projects.
The VX1161 forms the interface between fusion ECUs and sensors with CANape log. It enables raw and XCP data to be measured with a very compact design.
The POD interface cards offer a very high measurement data throughput of more than 100 MByte/s each for XCP and radar raw data. The streaming interface cards process up to 6.4 Gbit/s video, radar or other streams per channel.
The interfaces of the VN5000 family are compact and very powerful interfaces for accessing Automotive Ethernet. They offer easy and transparent access to the relevant physical layers and thus enable Ethernet frames to be recorded – together with data from other bus systems such as CAN (FD).
Diagnostics and Flashing
The following products from Vector support DoIP (Diagnostics communication over Internet Protocol). Compared to CAN, DoIP offers a significantly higher gross data rate and therefore the possibility to diagnose or reprogram multiple CAN, LIN, FlexRay and Ethernet ECUs in parallel.
CANoe is one of the diagnostic testers in Vector's diagnostic tool chain. It offers reliable ECU diagnostics via DoIP in the laboratory and the vehicle. Therefore it supports DHCP and parameterization of a Gateway Logical Address (GLA) and IP address. In addition to CANalyzer, CANoe offers remaining bus simulation across networks and testing of ECUs and entire networks.
CANalyzer is one of the diagnostic testers in Vector's diagnostic tool chain. It offers reliable ECU diagnostics via DoIP in the laboratory and the vehicle. Therefore it supports DHCP and parameterization of a Gateway Logical Address (GLA) and IP address. The focus of CANalyzer is analysis of the whole vehicle communication across network and protocol boundaries.
Indigo is an easy to use diagnostic tester, which is largely self-configurable and masks the complexity of the diagnostic protocols. It offers a quick overview of the vehicle status and permits detailed diagnostics of individual ECUs.
The Vector D-PDU API is a programming interface, standardized in ISO 22900-2, for accessing a Vehicle Communication Interface (VCI). The API abstracts from the underlying VCI, especially from implementation of the communication protocol (UDS and others). For remote access, the Vector Remote D-PDU API is available.
The interfaces of the VN5000 family are compact and very powerful interfaces. They offer simple and transparent access to the relevant physical layers 100BASE-TX and Automotive Ethernet (100/1000BASE-T1). The VN56xx interfaces can also control the DoIP Activation Line.
The VN8810 is a compact and intelligent diagnostic hardware device for various applications involving vehicle diagnostics. Accessing the vehicle is easily done via the OBD socket. The reprogramming of ECUs and the execution of diagnostic scripts is handled by one single hardware device. The VN8810 operates thereby autonomously in standalone mode. Additionally the device serves as an access point for remote diagnostics.
AUTOSAR basic software modules for vehicle diagnostics over DoIP. They allow diagnostics and quick reprogramming of Ethernet ECUs as well as parallel diagnostics and reprogramming of CAN, LIN and FlexRay ECUs behind a DoIP gateway
Automotive Ethernet Poster
This informative and clearly structured poster in DIN A1 format offers important technical details about:
Structure of Ethernet packets
IPv4 and IPv6 addresses, address structures and headers
Currently no events are planned. All events can be viewed on the
Vector offers numerous seminars and workshops dealing with Vector software tools, Vector standard software components, AUTOSAR and current bus technologies and protocols. The following regular training classes are held at the Vector office. It is also possible to arrange a training at your location and tailored for your specific requirements.
This workshop teaches you the fundamentals of Ethernet- and IP-based communication in motor vehicles. You also get an overview of application-related protocols and their use cases. Furthermore you learn a lot about the functions of CANoe/CANalyzer.Ethernet for analyzing, simulating and testing Ethernet- and IP-based communication.
In this hands-on training you will gain a fundamental knowledge about the connection of Ethernet and TCP/IP to the AUTOSAR Software architecture. We will take a detailed look at the most important Automotive use cases and you will learn about their general mode of operation as well as the according configuration principles in the AUTOSAR Software architecture.
This workshop gives you a fundamental knowledge of Ethernet- and IP-based communication in motor vehicles, as well as a short overview of relevant protocols and their application areas. You will learn how to define and configure ethernet networks using PREEvision to derive an Ethernet communication description.
Vector Remote Trainings consist of several sessions which are spread over several weeks. The sessions build upon each other and comprise exercises and homework.
The trainees are connected with the trainer by bidirectional audio-link, so questions can be posed and solutions discussed with the trainer. Course material and software can be downloaded.
This Remote Training addresses users of CANoe.Ethernet. The course is designed to provide an overview of CANoe.Ethernet’s basic features and an introduction to Automotive Ethernet. The only prerequisite to this Remote Training module is basic knowledge of CANoe features.
In this training you will learn about the new and very flexible Vector Ethernet hardware driver concept. We show you how to easily migrate your existing configurations. After the traing you are confident to change your projects to the new concept yourself.
This workshop gives you a fundamental knowledge of Ethernet and IP-based communication in motor vehicles, as well as a short overview of relevant protocols and their application areas. Afterwards you will learn the service-oriented modeling of an Ethernet-based architecture in PREEvision.
In this training you will gain a fundamental knowledge about Ethernet Physical Layers (PHY), TCP/IP and protocols that are commonly used in Automotive applications. You will learn about the connection of Ethernet and TCP/IP to the AUTOSAR Software architecture and the most important Automotive use cases. In the additional practice you are going to apply the previously learnt topics in several exercises, e.g. you will configure the MICROSAR Ethernet Software.
E-Learning for the Basics of Automotive Ethernet
In this E-Learning course you will learn the fundamentals of Ethernet- and IP-based communication in the automotive field.
The E-Learning course is also suitable for customers participating in the Ethernet and IP Workshops and Remote Trainings of the VectorAcademy. You can learn the basics of Ethernet- and IP-based communication prior to attending the workshop. In this way, entry into the workshop is made easier because some contents are repeated and covered in more depth during the training.