VN8900 - Modular FlexRay/CAN FD/LIN/J1708/K-Line Network Interface with up to 8 Channels

The VN8900 network interface is a modular designed interface hardware with various possible channel combinations for CAN FD, LIN, FlexRay, J1708 and K-Line.

A particular focus here is on parallel access to multiple bus channels and I/Os with high requirements on real-time and latencies also in standalone operating mode.

Advantages

Keypad for standalone operating mode
Network interface with integrated real-time computer
Modular concept allows a wide range of channel combinations by simply interchangeable transceivers for different bus physics
Optimal performance for CANoe/CANape/ CANalyzer applications with CAN, CAN FD, FlexRay, LIN, J1708 and K-Line bus access
Real-time bypassing and rapid prototyping platform in combination with CANape
SSD/CFast memory
Integrated analog/digital I/O interface
Minimal latency times and synchronized interfaces
Easy to configure via USB plug & play or Ethernet interface

Gallery

Todos Imágenes Vídeos

System overview

Base unit VN8914

Base unit VN8914 backside connectors

Base unit VN8911

Base unit VN8911 backside

VN8970: FlexRay/CAN/LIN/J1708 plug-in module

VN8972: FlexRay/CAN/LIN/J1708 plug-in module

Base Units and Plug-in Modules

A VN8900 system consists of a base unit and a plug-in module

Base Units:

VN8911: Base unit with integrated Intel ATOM processsor
VN8914: High performance base unit with integrated Intel Core-i7 processor of the 6th generation.

The base units contain the component “Extended Real Time” (ERT). This component improves the latency and the determinism of CANoe and CANape. It also executes predefined functions under real-time conditions.

Plug-in Modules:

VN8970/VN8972: FlexRay/CAN/CAN FD/LIN/J1708/K-Line modules with analog/digital IO expandability

Application Areas

VN8911:

Mobile, stationary as well as standalone applications
Applications where access to several bus channels and I/Os is required
Suitable for environments with voltage dips and extreme temperature conditions

VN8914:

Stationary as well as standalone applications
Applications where access to several bus channels and I/Os is required
Applications, which need high performance data throughput
Test stands with extensive CANoe configurations or MATLAB simulations
Huge laboratory test environment

Ethernet Interface - Use Case Matrix

_{Application Area}	_{Physical Layer}	_{Network Interfaces}
		_VN5640	_VN5610A	_VN7640	_VX0312	_VN8900
_{ECU Communication}
_{Measurement / Simulation Analysis, simulations, or more complex test tasks within an Ethernet network.}	_{Automotive Ethernet (100BASE-T1)}	_x	_x	_-	_-	_-
	_{Automotive Ethernet (1000BASE-T1)}	_x	_-	_-	_-	_-
	_{Standard Ethernet}	_x	_x	_-	_-	_-
_{DoIP Access to ECUs via the DoIP standard. An additional DoIP Activation Line is available.}	_{Standard Ethernet}	_x	_x	_x	_x	_x⁽¹⁾
_{Logger Extender The interface can be connected as an extension for loggers with Ethernet support. The data recorded by the interface will be transferred to the logger.}	_{Standard Ethernet}	_x	_-	_-	_-	_-
_{Infrastructure}
_{XCP Fast and reliable connection to a PC with measurement and calibration software via XCP-on-Ethernet.}	_BroadR-Reach	_x	_x	_x	_x	_x
	_{Standard Ethernet}	_x	_x	_x	_x	_x
_{Adapter Windows network driver (NDIS) to operate the Ethernet/BroadR Reach interface as a regular network adapter for tools without XL driver support.}	_{Standard Ethernet}	_-	_-	_-	_x	_-
_{ETH Host Alternative connection of the interface to the test PC via Ethernet.}	_{Standard Ethernet}	_⁽²⁾	_⁽²⁾	_x	_-	_x

_{⁽¹⁾ = without Activation Line
⁽²⁾ = available in a later release}

Technical Data

Base Units Plug-in Modules

^{Base Units}	^VN8911	^VN8914
^CPU	^{Intel ATOM E3845 Quad Core}	^{Intel Core-i7 6822EQ Quad Core}
^{Supported plug-in modules}	^VN8970	^{VN8970 / VN8972}
^{Ethernet ports}	^{2 x GbETH}
^{USB host interface}	^{1 x USB 2.0, 1 x USB 3.0 (Superspeed)}	^{3 x USB 3.0 (Superspeed)}
^{USB client interface}	^{1 x USB 3.0 (Superspeed)}	^{1 x USB 3.0 (Superspeed) with screw locking}
^{Hardware sync.}	^1x
^{Solid State Drive (SSD)}	^{16GB (CFast)}
^{SD card slot}	^{direct access on the back side}
^{Power-Up-Down (e.g. clamp 15)}	^yes
^{KeyPad and LED}	^{back side}	^{front side}
^{Input voltage}	^6...36V	^10...36V
^{Temperature range}	^-40...+60°C	^0...+50°C
^Cooling	^passive	^{active fan}
^{Component "Extended Real Time" (ERT)}	^yes
^{Driver library}	^{XL-Driver Library for FlexRay/CAN/LIN via USB or Ethernet}
^{Operating system (host PC)}	^{Windows 7/8.1 (32 and 64 bit), Windows 10 (64 bit)}

Plug-in module	VN8970			VN8972
Channels	FlexRay	CAN/ CAN FD	LIN/ K-Line*	FlexRay	CAN/ CAN FD	LIN/ K-Line*
	1	6	-	1	6	-
	1	5	1	1	5	1
	1	4	2	1	4	2
	-	8	-	2	4	-
	-	7	1	2	3	1
	-	6	2	2	2	2
	-	5	3*	-	8	-
	-	4	4*	-	7	1
	additional 1 digital/analog IO channel configurable with piggyback; ^{_{* max. 2 K-Line channels possible}}			-	6	2
				-	5	3*
				-	4	4*
				additional 1 digital/analog IO channel configurable with piggyback; ^{_{* max. 2 K-Line channels possible}}
CAN controller	FPGA-based Vector CAN controller CAN FD capable, full support of all CANoe.CAN functions, e.g. send error frames, measurement of bus load and ListenOnly mode
FlexRay cluster (A+B)	1			2
FlexRay controller	Bosch E-Ray (FPGA)			Bosch E-Ray (FPGA)
FlexRay controller (startup)	Fujitsu MB88121			Bosch E-Ray (FPGA)
FlexRay send memory	2 MB
LIN controller	Vector LIN controller (FPGA) compatible to LIN1.3, LIN2.0, LIN2.1 and J2602, full support of all CANoe.LIN functions, e.g. conformity tests, stress functions and flash mode of 7269 transceiver.
Supported transceiver	Support of all magnetically/capacitive decoupled piggybacks, as well as J1708opto piggyback
IO expandability	I0piggy8642 Digital: 8 inputs, 6 outputs / Analog: 4 inputs, 2 outputs
Onboard transceiver	4 x NXP TJA1051 (CAN highspeed) with electrical isolation
Temperature range	Operating: -40...+60°C Transport and storage: -40...+85°C			Operating: 0...+50°C Transport and storage: -40...+85°C
Power consumption	typ. 7W			typ. 8W
Power supply	via base unit
Time stamp accuracy	1 μs