Vector Hardware Components

Vector supports you in the development, analysis and optimization of electronic vehicle networks and ECUs with various hardware components.

Our product range includes several interfaces that connect your PC to bus systems and networks such as CAN FD, LIN, J1708, Ethernet, FlexRay or MOST. Data loggers, scalable calibration and measurement hardware as well as modular test hardware for HiL systems complete the portfolio.

In addition, you can count on Vector's competent support in the development of ECUs for prototypes and small series productions with the Vector Controller hardware - from specification to production qualification.

Hardware A-Z

To get more detailed information about our accessories like Cables and Adaptors, Vector PCMCIA, CardBus and ExpressCard Drives or Accessories for GL Loggers and CANlog, please click the following link.

More Information

Mostrar más

The Vector network interfaces have a flexible connection to the respective bus system via interchangeable bus transceivers. The user has the choice of several bus transceivers for CAN (FD), LIN, K-Line, FlexRay, Sensor and J1708 bus systems. The transceivers are available as piggyback boards.

More Information

Mostrar más

The CANextender is a programmable input/output device for CAN systems that can be used where analog and digital measurements must be acquired and transmitted to the CAN bus via CAN messages. For this purpose, the CANextender reads in digital and analog signals and evaluates them according to a configuration program created by the user. The configuration program thus specifies via which CAN messages and how often the measurement values are transmitted on the CAN bus.

More Information

Mostrar más

CANlog 3 and CANlog 4 record the data communication of CAN and LIN systems. Messages will be received, saved, and evaluated according to the loaded configuration.

More Information

Mostrar más

FRstress generates reproducible disturbances in FlexRay systems. It can generate protocol errors as well as manipulations in bus physics that are activated by trigger conditions. FRstress is an easy-to-use hardware module whose integration in the system differs depending on the desired fault injection.

More Information

Mostrar más

The GL loggers are special automotive data recorders which can be used in test vehicles or on test benches. They record measurement values and acquire the data communications of CAN, LIN, FlexRay bus systems. In addition, GL loggers store time-synchronously measured values from internal ECU parameters via CCP/XCP and diagnostics, digital and analog inputs and GPS data.

More Information

Mostrar más

The measurement modules of our partner CSM are extremely rugged, compact, efficient and highly precise over the entire operating temperature range. CSM has been setting technological standards for years now, especially in the field of decentralized measurement technology. Its CAN measurement modules have proven themselves for over 15 years. They are in continual use worldwide and assure easy measurement of temperature, electrical voltages, mechanical stresses, rotational speeds, etc.

Mostrar más

Software tools used to develop, simulate, test and maintain distributed systems require powerful and flexible network interfaces. Vector offers you interfaces for CAN (FD), LIN, J1708, Ethernet/IP, FlexRay, 802.11p and MOST as well as driver software and programming interfaces for use with Vector software tools and in customer-specific solutions.

Mostrar más

Vector Controllers are ECUs that can be used universally for vehicle communication. They are perfect for rapid development of functional samples and use in small series productions.

More Information

Mostrar más

VH6501 is a flexible yet compact CAN (FD) disturbance hardware and a network interface for CANoe combined in one device. It enables you to generate disturbances of almost any kind precisely and reproducibly in CAN (FD) networks. This makes it the ideal tool for testing the fault handling of nodes.

Mostrar más

To test ECUs thoroughly, it is not only necessary to connect the communication networks to the test system, it is also necessary to connect the I/O interfaces. This task is handled by the Vector VT System. It simplifies the setup of test benches and HIL test systems immensely, because it integrates all circuit components needed to connect an I/O channel in one module. Examples of I/O channels are an ECU's output for controlling a headlamp or input for connecting a brightness sensor. 

More Information

Mostrar más

The VX0312 is a Ethernet / BroadR-Reach USB adapter with integrated CAN-FD-connection developed to meet automotive requirements. XCP on Ethernet or XCP on BroadR-Reach devices can quickly and reliably be connected via the VX0312 to a computer having a measurement and calibration software installed.

More Information

Mostrar más

The VX1000 System is a scalable solution with top performance for your measurement and calibration tasks. It can be used in the vehicle – both in the interior and in the engine compartment –, on test benches and in the laboratory. The system forms the interface between the ECU and a measurement and calibration tool such as CANape. For high data throughput with minimal impact on ECU run-time, data is accessed over the microcontroller-specific data trace and debug ports.

More Information

Mostrar más

Trainings, Workshops and Knowledge

Vector offers numerous seminars and workshops dealing with Vector software tools, Vector standard software components, AUTOSAR and current bus technologies and protocols. Our training team consists of numerous experienced engineers who are pleased to impart their extensive knowledge and experience to others.