Vector Driver Setup 11.6.2

The setup supports the operating systems Windows 7 (32 bit + 64 bit), Windows 8.1 (32 bit + 64 bit) and Windows 10 (64 bit). You can read further information about the supported operating systems for each device in the file Drivers/readme.txt within the download package.

Note: CAN FD capable Network Interfaces with driver versions V10.x.x and later support ISO CAN FD and non-ISO CAN FD (Exception: VN5610(A) supports ISO CAN FD and non-ISO CAN FD starting with V9.8.64). For non-ISO CAN FD support of Network Interfaces with older drivers a dedicated "Vector Driver Setup non-ISO CAN FD" can be found in the download-center.

The following setups are contained:

CANcardXL
8.7.16
CANcardXLe
7.9.32 / 7.9.30 (64 bit)
CANcaseXL
8.7.16
CANboardXL
8.7.16
VH6501
10.4.18
VN0601
9.2.24
VN1530/VN1531 10.9.14
VN1610/VN1611/1630(A)/VN1640(A)
10.9.12
VN1630 log
10.4.16
VN2600/VN2610
8.8.22
VN2640
8.4.36
VN3300/VN3600
8.2.26
VN4610 11.2.20
VN5430 11.4.14
VN5610(A)
11.4.14
VN5620 11.4.14
VN5640
11.4.14
VN7570
10.3.18
VN7572
11.0.12
VN7600
9.9.26
VN7610
10.6.14
VN7640
10.8.20
VN8810 USB
10.2.144
VN8810 Ethernet
10.2.144
VN8900 Interface Family
10.2.142
VX0312
9.4.28
VX1131 / VX1132 10.0.28
VX1135 10.0.24
VX1161.41A / VX1161.41B 11.3.18
USB Dongle
6.63
Vector Hardware Config 11.4.16
Vector Keyman
11.6.10
Vector Platform Manager
3.5.47 NEW


Note: The drivers for VN8900 do not support VN8910(A) anymore.

CAUTION: For the devices VN8911, VN8912(A), and VN8914 the drivers on the device must also be updated. To do this the device must be connected via USB. The manual "Accessories for Network Interfaces" is available for download (PDF).

Categoría : Driver/Firmware
Tamaño : 1.48 GB
Resumen MD5 : 4d081e9596bf51e4c5b220205583c41c
Descargar ahora pagina anterior