Categoría: Archivo Fecha: 2017-05-17 Idioma: English Tipo: PDF Tamaño: 691 KB

CANalyzer Fact Sheet

Short overview of facts about CANalyzer - Comprehensive ECU and network analysis with just one tool

Categoría: Archivo Fecha: 2017-09-25 Tipo: PDF Tamaño: 1 MB

CANoe/CANalyzer Option .Scope User Manual

The option .Scope is an integrated oscilloscope solution for CANoe and CANalyzer, based on USB scope hardware. A special Scope Trigger Y-Cable ensures that the scope hardware is time-synchronized with CANoe/CANalyzer and supports two different trigger concepts: a) triggering on CAN/CAN FD, LIN and FlexRay bus events/errors using the sync line of Vector's interface hardware to externally trigger the scope hardware. b) triggering on voltage edges of any I/O signal or bus signals using the scope hardware's internal triggers and the arbitrary waveform generator output for the time synchronization.

Categoría: Archivo Fecha: 2017-03-02 Idioma: English Tipo: PDF Tamaño: 2 MB

CAN tools – then and now

From CAN analysis to a complex multibus development and simulation tool - This article leads us from the modest beginnings of the CAN tools and the past challenges to the currently achieved state and the emerging trends for the future.

Categoría: Archivo Fecha: 2016-07-29 Idioma: English Tipo: PDF Tamaño: 2 MB

Product Information CANalyzer

All information about CANalyzer in detail - Analysis of ECUS and entire networks on highest level

Categoría: Archivo Fecha: 2013-06-03 Idioma: English Tipo: PDF Tamaño: 457 KB

A good combination – access to Ethernet and CAN with one device

Vector is introducing the new VN5610 device - a compact Ethernet/CAN interface with USB. Developers in the automotive and aerospace industries will benefit from simultaneous access to CAN networks and Ethernet-based systems such as Broad-R-Reach or AFDX® with just one interface. The new hardware can be used in tasks ranging from remaining bus simulations to Ethernet monitoring and synchronization of Ethernet frames with other bus systems such as CAN. In particular, developers will benefit from highly precise time stamps with a common time base for synchronizing the various systems.

Categoría: Archivo Fecha: 2017-05-03 Idioma: English Tipo: PDF Tamaño: 1 MB

AN-IND-1-001 CANoe and CANalyzer as Diagnostic Tools

This application note gives an introduction into working with diagnostics in CANoe and CANalyzer. It presents the basic technical aspects and possibilities with the Diagnostic Features Set, complements the help file of CANoe and CANalyzer and may be used as a tutorial.

Categoría: Archivo Fecha: 2011-04-13 Idioma: English Tipo: PDF Tamaño: 297 KB

New Bus Interfaces for Electric/Hybrid Vehicle Development

The many different bus systems used in the development of electric/hybrid vehicles (EV/HEV) are pushing conventional hardware interfaces to their performance limits. A crucial factor in determining testing depth, analysis quality and simulation options is the degree of real-time performance in data exchange. Communication between vehicle networks and the test and simulation tools is of primary importance here. To satisfy these heightened requirements, Vector has added a modular high-performance interface with integrated real-time computer to its interfaces product line. This interface’s realtime performance leads to short deterministic cycle and response times and enables flexible use in...