The four-channel network module VT6104A is a high-performance interface module for the VT System. As with other VT System modules, faults can be fed onto the signal lines. The module offers high performance and low latency times, because a PCI Express cable is used to connect the network interface to the VT6011/VT6051A real-time module or a PC. If connected to the PC, a PCI Express cable connector (x1) is needed. This may be added to the PC using an appropriate expansion card.
Network Module: VT6104A
Network interface with four independent channels
Each channel may be individually configured as a CAN or LIN interface
Proven, interchangeable Vector CAN/LIN piggies may be used as bus transceivers
Hardware synchronization of the network interfaces with the VT System
Relays for line breaks and short circuits between signal lines, to ground or to battery voltage
Switchable termination resistors
All channels can be connected by using the internal bus bar
Number of channels
Up to 4 CAN or 4 LIN
Sending and receiving 100% bus load. Certified Vector CAN controller (FPGA).