VH6501
Our CAN Disturbance Interface - Flexible & Compact

Precise and Reproducible Disturbances of CAN (FD) Networks

VH6501 is a flexible yet compact CAN (FD) disturbance hardware and a network interface for CANoe combined in one device.

In particular, the combination of disturbance hardware and network interface allows very simple test setups for CAN (FD) conformance tests without an additional network interface or a special cable.

Gallery

VH6501 front view - 5x multicolour LEDs show activities and status
Photo of VH6501 connectors at bus side: 2x D-SUB9
Connectors at bus side: 2x D-SUB9
Photo of VH6501 connectors at USB side: each 1x USB, D-SUB9, Host/Ethernet and 2x Power/Sync
Connectors at USB side: each 1x USB, D-SUB9, Host/Ethernet and 2x Power/Sync
Schematic of the wiring options
Wiring options

Advantages

  • Disturbance hardware and network interface combined in one compact USB device
  • Extensive trigger sources and disturbance types
  • Fine granular output of complex disturbances
  • External trigger output
  • Seamless CANoe integration
  • CAPL functions for test automation
  • Analog/digital I/O functionality
  • Connection for external time synchronization

Application Areas

VH6501 enables you to generate disturbances of almost any kind precisely and reproducibly in CAN (FD) networks. This makes it the ideal tool for testing the fault handling of CAN (FD) nodes. Such tests are an essential part of conformance tests on a physical level, for example the software tool CANoe Test Package VAG is used for.

Functions

Digital disturbances

  • Arbitrary sequences of dominant and recessive levels (including recessive stress)
  • Max. 4,096 level change in a sequence
  • Support for different trigger conditions:

    • I/O triggers

    • Frame triggers, e.g. SOF, Frame, Bus Idle, Error

    • Combined frame triggers for disturbing e.g. different IDs (up to 32 parallel conditions including wildcards)

Analog disturbances

  • Asynchronous, without own trigger condition
  • Support for different error and test modes:

    • Short-circuit tests

    • Cross-wiring

    • Modification of the R and C network parameters:

      • R: 500 Ω...25 kΩ (non-linear)

      • C: 100 pf...10 nF (non-linear)

Technical Data

   
CAN (FD) channel TJA1057 Piggyback
CAN2.0: 2 MBit/s
CAN FD: up to 8 MBit/s
Digital CAN disturbances
Arbitrary sequence of dominant and recessive levels:
  • Min. step size 6.25 ns
  • Min. dominant/rezessive phase length of 50 ns
 
Analog CAN disturbances Short circuit and cross wiring tests
Modification of RC network parameter
I/O functionality (onboard) Digital outputs: 1
Digital inputs: 2
Analog inputs: 1
Connectors 2x D-SUB9 (male+female) for 1 CAN channel
1x D-SUB9 for I/O; 1x Binder (type 711) for external trigger
1x Binder (type 711) for time synchronization with Vector hardware
PC interface USB 2.0
External power supply 6 V...<60 V DC
Power consumption Typical 7 W
Operation system requirements Windows 10 (32 bit or 64 bit),
Windows 7/8.1 (32 bit or 64 bit)
Software  requirements CANoe Version 10.0 SP2 (SP3 or higher recommended)
Temperature range Operation: -40 °C...+60 °C
Storage: -40 °C...+85 °C
Dimensions (LxWxH) Approx. 155 mm x 111 mm x 45 mm
Weight Approx. 600 g

Product Descriptions

显示更多

Take advantage of this useful webinar recording, which covers not only a general product presentation but also practical application examples:

 

"How to optimally disturb CAN (FD) networks with the new VH6501 interface"
Recorded on February 21, 2018, duration: 45 minutes

 

 

显示更多

Downloads