VN5610A / VN5640
Interfaces for Automotive Ethernet and CAN FD
VN5640 Option 1000BASE-T1
Interface for Automotive Ethernet and CAN FD

VN5610A/VN5640 - Powerful and Multifunctional USB Network Interfaces for Automotive Ethernet and CAN FD

The VN5610A and VN5640 are compact and very powerful interfaces with USB host connection for accessing Ethernet and CAN (FD) networks.

There are many use cases for the VN5610A and VN5640 such as  Ethernet monitoring, frame- as well as load generation or synchronous tracing of Ethernet frames with other bus systems such as CAN.

Furthermore the VN5640 interface offers with its numerous Ethernet channels a powerful platform for extensive analysis, simulation or complex testing tasks within an Automotive Ethernet network.

Advantages

  • Two (VN5610A) independent Ethernet channels for the IEEE standards 100BASE-T1 (BroadR-Reach) as well as 10BASE-T/100BASE-TX/1000BASE-T
  • Twelve (VN5640) independent Ethernet channels for the IEEE standards 100BASE-T1 (thereof up to six channels 1000BASE-T1 in the Option  1000BASE-T1) and four additional channels
    10BASE-T/100BASE-TX/1000BASE-T
  • Two CAN highspeed channels (CAN FD capable)
  • Ethernet monitoring between two nodes
  • Additional IO interface for setting (e.g. the DoIP Activation Line) or sampling of digital values
  • Comprehensive analysis on a network with multiple nodes (VN5640)
  • Optimal support of Diagnostics over IP through additional DoIP Activation Line
  • Hardware filtering of Ethernet and CAN data already integrated on the interface
  • Integrated Layer 2 switch for optimized remaining bus simulation with several channels (VN5640)
  • Hardware load generators for low jitter and full bandwidth
  • Stand-alone mode capability ensures uninterrupted operation
  • Host connection via USB 2.0 and/or USB 3.0 (VN5640) as well as USB-bus-powered power supply (VN5610A)
  • Precise time stamps
  • Optimal performance when used with CANoe/CANalyzer.Ethernet
  • Synchronization between multiple devices and with other bus systems (CAN, LIN, FlexRay, MOST)
  • Fastest flashing with the Vector flash tool vFlash
  • Open interface for third-party tools with the XL Driver Library (CAN and Ethernet)
  • High flexibility by reconfigurable FPGA hardware architecture
  • Rugged housing, power supply and temperature range ideal for automotive or other industrial applications
  • With CANoe.AFDX or CANalyzer.AFDX access to the Ethernet-based AFDX® protocol that is widely used in the aerospace industry (VN5610A)

Application Areas

  • Remaining bus simulation:
    Independent channels for Ethernet and CAN. On all channels, simultaneous operation of remaining bus simulation is possible with CANoe/CANalyzer.Ethernet.
  • Media converter:
    Data link between 100BASE-T1 (BroadR-Reach) and 100BASE-TX/1000BASE-T physical layer. VN5640 Option 1000BASE-T1 with additional data link between 1000BASE-T1 and 1000BASE-T.
    Benefit: Standard Ethernet logger and Ethernet acces-sories can be connected.
  • Direct access:
    Individual access to each channel, for example, for repro-gramming of ECUs for vehicle diagnostics or testing of several identical systems on a test bench.
  • Ethernet monitoring:
    Transparent connection (in/out/monitor) between two nodes (e.g. Diagnostic over IP Monitoring) and moni-toring with exact time stamps.

Ethernet Interface - Use Case Matrix

Application Area
Physical Layer Network Interfaces
  VN5640 VN5610A VN7640 VX0312 VN8900
ECU Communication
Measurement / Simulation
Analysis, simulations, or more complex test tasks within an Ethernet network.
Automotive Ethernet
(100BASE-T1)
x x - - -
Automotive Ethernet
(1000BASE-T1)
x - - - -
Standard Ethernet
x x - - -
DoIP
Access to ECUs via the DoIP standard. An additional DoIP Activation Line is available.
Standard Ethernet
x
x
x x
x(1)
Logger Extender
The interface can be connected as an extension for loggers with Ethernet support. The data recorded by the interface will be transferred to the logger.
Standard Ethernet
x
-
-
-
-
Infrastructure
XCP
Fast and reliable connection to a PC with measurement and calibration software via XCP-on-Ethernet.
BroadR-Reach x x x x x
Standard Ethernet
x x x x x
Adapter
Windows network driver (NDIS) to operate the Ethernet/BroadR Reach interface as a regular network adapter for tools without XL driver support.
Standard Ethernet - - - x -
ETH Host
Alternative connection of the interface to the test PC via Ethernet.
Standard Ethernet (2) (2)
x
-
x

 

(1) = without Activation Line
(2) = available in a later release

Accessories

BRcable2Y: Y cable for Vector Ethernet Interface VN5610A/VN5640 with D-SUB9 double assignment for 100BASE-T1.

Different cable solutions for adapting 100BASE-T1/1000BASE-T1 networks and different cables for the power supply are available (AC adapter, vehicle power plug,
banana plugs).

Product Descriptions

Technical Data
显示更多

Do you have technical questions and are looking for suitable answers? Our KnowledgeBase provides the most important FAQs for you.

显示更多

Downloads

Please select a category to show matching downloads:

Related Content

显示更多

Network Interfaces

Interfaces for CAN, CAN FD, LIN, J1708, Ethernet/IP, FlexRay, and MOST

Overview about the network interfaces
显示更多

Hardware Accessories

Various accessories for Vector network interfaces and loggers.

More about hardware accessories
显示更多

Testing

Vector testing tools for the implementation of simulation and test environments in an efficient way.

More information
显示更多

Measurement Technology

Master the Entire Measurement Chain from A to Z!

More information
显示更多

ECU Calibration

Measure & calibrate ECUs optimally – from A to Z!

Learn more
显示更多

Tools & Services for Diagnostics

Tools & services for the complete development process.

More about Tools & Services