Get an Overview
Further Accessories

Overview of Further Accessories

Vector offers a variety of other accessories. This overview helps you to find suitable accessories for your device.

Ser2K

Ser2K is an adapter cable for voltage level conversion from RS232 to K-Line (DIN9021).

  • Length: 1.5 m
  • Connectors: 1 x female D-SUB9 connector, 3 x banana plugs
  • Operating temperature range: -20 °C ... +50 °C

USB Protector Type 1

Protection against mechanical damages at the USB connector of VN1630, VN16130A, VN1640 or VN1640A. Use with other devices is not possible.

Order USB Protector Type 1

VNcable DSUB37

Connection cable with D-SUB37 connectors.

  • Length: 1.5 m
  • Connectors: 1 x D-SUB37 (male), 1 x D-SUB37 (female)

Terminal Block DSUB37

Terminal block with 37 CAGE CLAMP® connectors to D-SUB37 (requires VNcable DSUB37).

  • Dimensions: 102 mm x 34 mm x 85 mm
  • Weight: 102 g
  • Connectors: 1 x row with 19 CAGE CLAMP® connectors, 1 x row with 18 CAGE CLAMP® connectors, 1 x D-SUB37 (female)

USB Cables

USB Cable 3.1 (Type AC with Screws)

USB 3.1 cable

  • Length: approx. 1.8 m
  • Connectors: 1 x connector type A, 1 x connector type C with screws
显示更多

USB Cable 3.1 (Type C-C with Screws)

USB 3.1 cable

  • Length: approx. 1.8 m
  • Connectors: 1 x connector type C, 1 x connector type C (with screws)
显示更多

USB Cable 3.0 (A-B, 1.8m)

Standard USB 3.0 cable.

  • Length: approx. 1.8 m
  • Connectors: 1 x connector type A, 1 x connector type B
显示更多

USB Cable 3.0 (Type B Conn. with Screws)

USB 3.0 cable.

  • Length: approx. 1.8 m
  • Connectors: 1 x connector type A, 1 x connector type B (with screws)
显示更多

USB Cable 2.0

Standard USB 2.0 cable

  • Length: approx. 1.8 m
  • Connectors: 1 x connector type A, 1 x connector type B
显示更多

Fix Kits (Wall Brackets)

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing incl. seals and screws, e.g. for mounting VN1630A or devices with the same housing height.

显示更多

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing 1040 incl. seals and screws, e.g. for mounting VN1640A or devices with the same housing height.

显示更多

Fixing Kit containing 4 pcs. of wall brackets for ALUbos housing 1600/1680 incl. seals and screws, e.g. for mounting devices of the VN89xx family or devices with the same housing height.

显示更多

Antennas

2.4 & 5 GHz Antenna SMA-R Std.

Standard antenna for EU, USA and other non-Asian countries. Suitable for 2.4 GHz and 5 GHz applications.

显示更多

2.4 & 5.2 GHz Antenna SMA-R Asia

Standard antenna for Asia. Suitable for 2.4 GHz and 5.2 GHz applications.

显示更多

5.9 GHz DSRC Antenna SMA

Triton 5dBi DSRC 5.9GHz Dipole Terminal Antenna SMA(M). Hinged Connector for V2V and V2X Applications (5850-5925MHz DSRC band).

显示更多

GNSS Antenna SMA

Low profile magnet mounted GPS-GLONASS-GALILEO positioning antenna.

显示更多

Protection

For use with VN8900 interface family without a slide-in module (e. g. VN8950, VN8970, VN8972)

显示更多

This protection kit contains two rubber bumpers which replace the standard seals of housing size 1040.

显示更多

MOST

ECL cable for VN2640.

  • Length: 1.5 m
  • Connectors: 1 x male 3-pin Binder connectors (type 711), 3 x stripped wires
显示更多

The devices of the VN2600 Family can be connected with the MOST bus by using the Vector MOST fiber optic cable.

  • Length: 1 m
  • Connectors: 1 x Standard MOST 2+0 connector, 2 x POF fiber optic cables, 2 x HFBR 4531 connector
显示更多

The MOST fiber optic cable can be connected to other HFBR connectors with the included HFBR coupling. For this, the fiber ends are just stuck into the couplings. To release the  connection, just pull out the connectors.

显示更多

Product Descriptions

Related Pages

Network Interfaces

Interfaces for CAN, CAN FD, LIN, J1708, Ethernet/IP, FlexRay, and MOST

Overview About the Network Interfaces
Cables and Adapters

Overview of all cables & adapters for CAN, FlexRay and Automotive Ethernet, cables for OBD and...

Overview about Cables and Adapters