CANoe .J1939
Development & Test Tool CANoe .J1939

Simulation, Development and Test of J1939 Systems

SAE J1939 is a communication protocol based on CAN for real-time data exchange between control units in the area of commercial vehicles. It originates from the international Society of Automotive Engineers (SAE) and operates on the physical layer with high-speed CAN per ISO 11898. J1939 is a multimaster system with decentralized network management and primarily connection-less communication.

Because of its simulation capabilities, CANoe .J1939 is well-suited to the development, design and verification of J1939 networks. Its practical application as a diagnostic and debugging tool is just as feasible as its use in simulating the rest of the bus during startup or assembly. Especially the J1939 XML Test Module Manager supports the user in preparing integration and module tests.

Since the SAE J1939 specification is the basis for other networks such as NMEA 2000®, ISO 11783, ISO 11992 (Truck & Trailer), FMS (Fleet Management System) and GB/T27930, the Option can be used in those applications as well. When used in parallel with the .J1939 and .CANopen Options, CANoe is the ideal development and test environment for the CiA DS-413 CANopen Truck Gateway. In combination with the .J1587 Option it offers a uniform approach to systems that extend across bus boundaries with a common time base.

Advantages

  • Integrated configuration, analysis, simulation and test tool for electronic components in commercial vehicles from a single source
  • Extended CAPL interface for modeling J1939 systems
  • Fast device development by use of databases with predefined standard objects
  • Comfortable programming interface reduces the familiarization with the J1939 specification

Functions

CANoe .J1939 expands the standard functionality of CANoe with:

  • Support of the transport protocols BAM, CMDT and Fast Packet
  • Graphic display of the network nodes (scanner)
  • Protocol-specific display, checks, interpretation, filters and search functions in the Trace window
  • J1939 Filter in the measurement setup
  • Rapid simulation of ECUs
  • Expanded database
  • Diagnostic Trouble Code Monitor (DTC Monitor)
  • OBD Inspection and Maintenance Monitor
  • Diagnostic Memory window
  • J1939-82 Compliance Test (2008 und 2015 revisions)
  • GNSS Simulator and GNSS Monitor
  • Support of J1939 AUTOSAR 4.2.2 System Descriptions

Product Descriptions

 

Exibir mais

Do you have technical questions and are you looking for suitable answers? Our knowledge base provides the most important FAQs for you.

Exibir mais

Training

CANoe .J1939 Seminars

CANoe .J1939 provides a variety of possibilities for simulating, developing and testing J1939 systems.

But only those who are familiar with these options can fully tap the potential and save time and money.

Take advantage of our training and education offers in order to make even more efficient use of CANoe .J1939 in your day-to-day work!

News / Events


PREEvision as a Reliable Guide for First Steps in AUTOSAR Adaptive

Vector simplifies the introduction of AUTOSAR Adaptive: The model-based E/E development environment PREEvision comprehensively supports users in expanding existing software and hardware architectures with the capabilities of the AUTOSAR Adaptive Platform.


Technical Article: Overcoming Logging Challenges in ADAS Development Projects

The more tasks that driver assistance systems assume along the way to autonomous driving, the greater the number of

sensors in the vehicle from different suppliers. Real road traffic provides the ideal reference data for testing – in endless

variety. For this purpose, OEMs and system suppliers are sending test vehicles equipped with high-end data loggers onto

the streets to collect data. That data is then used to precisely ”re-simulate“ certain traffic situations in the laboratory

to test new or refined ADAS sensing and control logic. Instead of implementing numerous sensor-specific logging systems,

what is required are scalable approaches and strategies.


vVIRTUALtarget webinar announcements: "Virtual Developing and Testing AUTOSAR Software"

vVIRTUALtarget - realizing AUTOSAR projects in the fast lane

Exibir todas as notícias (231)
Exibir mais
Exibir mais
Exibir mais