Contato
Os seus contatos

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670-0

Fax: +49 711 80670-111

E-mail:

Address for Deliveries:
Motorstr. 56
70499 Stuttgart
Germany

Vector Informatik GmbH

Borsteler Bogen 27

Hamburg

Alemanha

Telefone: +49 40 2020130-0

Fax: +49 40 2020130-20

E-mail:

Vector Informatik GmbH

Frankfurter Str. 286

38122 Braunschweig

Alemanha

Telefone: +49 531 121990

Fax: +49 531 12199 20

E-mail:

Vector Consulting Services GmbH

Ingersheimer Str. 20

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 1520

Fax: +49 711 80670 444

E-mail:

Postal address:
Ingersheimer Str. 24

Vector Informatik GmbH

Philipp-Reis-Str. 1

76137 Karlsruhe

Alemanha

Telefone: +49 721 91430 100

Fax: +49 721 91430 101

E-mail:

Vector Informatik GmbH

Otto-Hahn-Str. 20

85609 Aschheim

Alemanha

Telefone: +49 89 94384220

Fax: +49 711 80670-111

E-mail:

Vector Informatik GmbH

Franz-Mayer-Str. 8

93053 Regensburg

Alemanha

Telefone: +49 941 208650

Fax: +49 941 20865 111

E-mail:

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 500

Fax: +49 711 80670 555

E-mail:

Technical Sales Embedded Software and AUTOSAR

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 400

Fax: +49 711 80670 425

E-mail:

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 200

Fax: +49 711 80670-111

E-mail:

Business hours: Monday to Friday from 8:30 am to 5:00 pm (CET/CEST).

Online: https://portal.vector.com

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 5050

Fax: +49 711 80670-111

E-mail:

Vector Informatik GmbH

Ingersheimer Str. 24

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 5770

Fax: +49 711 80670 333

E-mail:

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670-5050

Fax: +49 711 80670-111

E-mail:

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670-0

Fax: +49 711 80670-111

E-mail:

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 4618

Fax: +49 711 80670 499

E-mail:

Your contact:
Katja Hahmann
Manager Customer Projects for CANoe and automated Test Systems

Vector Informatik GmbH

Baierbrunner Str. 23

81379 Munich

Alemanha

Telefone: +49 89 74 7377-0

Fax: +49 89 74 7377-99

E-mail:

Vector Austria GmbH

Millennium Tower, Etage 41
Handelskai 94-96

1200 Vienna

Áustria

Telefone: +43 1 90160 0

Fax: +43 1 90160 35

E-mail:

Vector Austria GmbH

Millennium Tower, Etage 41
Handelskai 94-96

1200 Vienna

Áustria

Telefone: +43 1 90160 55

Fax: +43 1 90160 9955

E-mail:

Vector Austria GmbH

Millennium Tower, Etage 41
Handelskai 94-96

1200 Vienna

Áustria

Telefone: +43 1 90160 40

Fax: +43 1 90160 9940

E-mail:

Vector Austria GmbH

Millennium Tower, Etage 41
Handelskai 94-96

1200 Vienna

Áustria

Telefone: +43 1 90160 0

Fax: +43 1 90160 35

E-mail:

Vector North America

39500 Orchard Hill Place
Suite 500

Novi, Michigan 48375

EUA

Telefone: +1 248 449-9290

Fax: +1 248 449-9704

E-mail:

Operational sales automotive

Vector North America

39500 Orchard Hill Place
Suite 500

Novi, Michigan 48375

EUA

Telefone: +1 248-449-9290, Option 3

Fax: +1 248 449-9704

E-mail:

Vector North America

39500 Orchard Hill Place
Suite 500

Novi, Michigan 48375

EUA

Telefone: +1 248 449 9290 Option 1

Fax: +1 248 449-9704

E-mail:

Vector North America

39500 Orchard Hill Place
Suite 500

Novi, Michigan 48375

EUA

Telefone: +1 248 449 9290 Option 2

Fax: +1 248 449-9704

E-mail:

Vector GB Ltd.

2480 Regents Court
The Crescent
Birmingham Business Park

West Midlands B37 7YE

Reino Unido

Telefone: +44 121 788 7900

E-mail:

VAT No.: GB 941 2528 36
Registered in England Number 06699692

Vector GB Ltd.

2480 Regents Court
The Crescent
Birmingham Business Park

West Midlands B37 7YE

Reino Unido

Telefone: +44 121 788 7900

E-mail:

Vector GB Ltd.

2480 Regents Court
The Crescent
Birmingham Business Park

West Midlands B37 7YE

Reino Unido

Telefone: +44 121 788 7901

Fax: --

E-mail:

Vector GB Ltd.

2480 Regents Court
The Crescent
Birmingham Business Park

West Midlands B37 7YE

Reino Unido

Telefone: +44 121 788 7900

Fax: --

E-mail:

Vector Japan Co. Ltd.

Seafort Square Center Bldg.
2-3-12 Higashi-shinagawa, Shinagawa-ku

Tokyo 140-0002

Japão

Telefone: +81 3 4586 1800

Fax: +81 3 4586 1830

E-mail:

Vector Japan Co. Ltd.

Global Gate,
4-60-12 Hiraike-cho, Nakamura-ku, Nagoya-shi

Aichi, 453-6110

Japão

Telefone: +81 52 770 7170

Fax: +81 52 770 7190

E-mail:

Vector Japan Co. Ltd.

Cent Urban Bldg. 4F
3-23-15 Nishinakajima, Yodogawa-ku, Osaka-shi

Osaka 532-0011

Japão

Telefone: +81 6 6829 6446

Fax: --

E-mail:

Vector Japan Co. Ltd.

東京都品川区東品川2-3-12 シーフォートスクエア センタービル

〒140-0002

Japão

Telefone: +81 3 4586 1800

Fax: +81 3 4586 1830

E-mail:

Vector Japan Co. Ltd.

愛知県名古屋市中村区平池町4-60-12 グローバルゲート

〒453-6110

Japão

Telefone: +81 52 770 7170

Fax: +81 52 770 7190

E-mail:

Vector Japan Co. Ltd.

Seafort Square Center Bldg.
2-3-12 Higashi-shinagawa, Shinagawa-ku

Tokyo 140-0002

Japão

Telefone: +81 3 4586 1800

Fax: +81 3 4586 1830

E-mail:

Vector Japan Co. Ltd.

Tokyo Seafort Square Center Building
2-3-12 Higashi-Shinagawa, Shinagawa-ku

Tokyo 140-0002

Japão

Telefone: +81 3 4586 1810

Fax: +81 3 4586 1830

E-mail:

Online: https://portal.vector.com

Please refer to the following for reception hours:
- Phone 10-12 / 13-17 (Mo-Fr, excl. holidays)
- E-mail, fax / 24 hours at any time

Vector Japan Co. Ltd.

Seafort Square Center Bldg.
2-3-12 Higashi-shinagawa, Shinagawa-ku

Tokyo 140-0002

Japão

Telefone: +81 3 4586 1800

Fax: +81 3 4586 1830

E-mail:

Vector Japan Co.Ltd...

Seafort Square Center Bldg.
2-3-12 Higashi-shinagawa, Shinagawa-ku

Tokyo 140-0002

Japão

Telefone: +81 3 4586 1800

Fax: +81 3 4586 1830

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Sunyoung Center
Room 2701-2703, No.398 Jiang Su Road
Changning District

Shanghai 200050

China

Telefone: +86 21 2283 4688

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

801, 8th Floor, Indigo Plaza,
No.20 Jiuxianqiao Road,
Chaoyang District

Beijing 100016

China

Telefone: +86 10 8432 8600

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Sunyoung Center
Room 2701-2703, No.398 Jiang Su Road
Changning District

Shanghai 200050

China

Telefone: +86 21 2283 4688

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Sunyoung Center
Room 2701-2703, No.398 Jiang Su Road
Changning District

Shanghai 200050

China

Telefone: +86 21 2283 4688

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Sunyoung Center
Room 2701-2703, No.398 Jiang Su Road
Changning District

Shanghai 200050

China

Telefone: +86 21 2283 4688

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Sunyoung Center
Room 2701-2703, No.398 Jiang Su Road
Changning District

Shanghai 200050

China

Telefone: +86 21 2283 4688

E-mail:

Vector Automotive Technology (Shanghai) Co., Ltd.

Room 1008, Galaxy Development Building, No. 18, Zhongxin 5th Road
Futian District

Shenzhen 518048

China

Telefone: +86 21 2283 4628

E-mail:

Vector Korea IT Inc.

9F, Yongsan Prugio Summit Office-dong,
69, Hangang-daero, Yongsan-gu

Seoul 04378

Coreia

Telefone: +82 2 807 0600

Fax: +82 2 807 0601

E-mail:

Vector Korea IT Inc.

9F, Yongsan Prugio Summit Office-dong,
69, Hangang-daero, Yongsan-gu

Seoul 04378

Coreia

Telefone: +82 2 807 0600 Ext.1

Fax: +82 2 807 0601

E-mail:

Vector Korea IT Inc.

용산구 한강대로 69 용산 푸르지오 써밋 업무동 9층

서울 04378

Coreia

Telefone: +82 2 807 0600 Ext.4

Fax: +82 2 807 0601

E-mail:

Vector Korea IT Inc.

9F, Yongsan Prugio Summit Office-dong,
69, Hangang-daero, Yongsan-gu

Seoul 04378

Coreia

Telefone: +82 2 807 0600 Ext.2

Fax: +82 2 807 0601

E-mail:

Vector Korea IT Inc.

602, Yongsan Prugio Summit Office-dong

Seoul 04378

Coreia

Telefone: +82 2 807 0600 Ext.3

Fax: +82 2 807 0601

E-mail:

Vector Italia s.r.l.

Corso Sempione 68

20154 Milano

Itália

Telefone: +39 02678171 10

Fax: +39 02678171 35

E-mail:

Vector Italia s.r.l.

Corso Sempione 68

20154 Milano

Itália

Telefone: +39 02678171 70

Fax: +39 02678171 35

E-mail:

Business hours: Monday to Friday from 9:00 am to 6:00 pm (CET/CEST).

Online: https://portal.vector.com

Vector Italia s.r.l.

Corso Sempione 68

20154 Milano

Itália

Telefone: +39 02678171 10

Fax: +39 02678171 35

E-mail:

Vector Italia s.r.l.

Corso Sempione 68

20154 Milano

Itália

Telefone: +39 02678171 10

E-mail:

Vector Informática Brasil Ltda.

Rua Verbo Divino 1488, 3º andar

4719-904 São Paulo - SP

Brasil

Telefone: +55 11 5180 2350

Fax: +55 11 5181 7013

E-mail:

Vector Informática Brasil Ltda.

Rua Verbo Divino 1488, 3º andar

4719-904 São Paulo - SP

Brasil

Telefone: +55 11 5180 2350

Fax: +55 11 5181 7013

E-mail:

Vector Informática Brasil Ltda.

Rua Verbo Divino 1488, 3º andar

4719-904 São Paulo - SP

Brasil

Telefone: +55 11 5180 2351

Fax: +55 11 5181 7014

E-mail:

Vector Informática Brasil Ltda.

Rua Verbo Divino 1488, 3º andar

4719-904 São Paulo - SP

Brasil

Telefone: +55 11 5180 2350

E-mail:

Vector North America

1351 South County Trail, Suite 310

East Greenwich, RI 02818

EUA

Telefone: +1 401 398 7185

E-mail:

Development software testing
Operational sales non-automotive
 

Vector North America

1351 South County Trail, Suite 310

East Greenwich, RI 02818

EUA

Telefone: +1 401 398 7185

E-mail:

Vector North America

1351 South County Trail, Suite 310

East Greenwich, RI 02818

EUA

Telefone: +1 401 398 7185

E-mail:

Vector France S.A.S.

106 avenue Marx Dormoy

92120 Montrouge

França

Telefone: +33 1 73 28 42 00

E-mail:

Vector France S.A.S.

106 avenue Marx Dormoy

92120 Montrouge

França

Telefone: +33 1 73 28 42 00

E-mail:

Vector France S.A.S.

106 avenue Marx Dormoy

92120 Montrouge

França

Telefone: +33 1 73 28 42 42

E-mail:

Vector France S.A.S.

9 rue Matabiau

31000 Toulouse

França

Telefone: +33 170 952 200

E-mail:

Squoring Technologies SAS

9 Rue Matabiau

31000 Toulouse

França

Telefone: +33 170 952 200

E-mail:

Vector France S.A.S.

106 avenue Marx Dormoy

92120 Montrouge

França

Telefone: +33 1 73 28 42 00

E-mail:

Vector Informatik India Pvt. Ltd.

No 11-14, 5th & 6th floor, Tara Heights,
Old Mumbai Pune Road, Wakadewadi

Shivaji Nagar, Pune 411003

Índia

Telefone: +91 20 6634 6600

E-mail:

Vector Informatik India Pvt. Ltd.

No 11-14, 5th & 6th floor, Tara Heights,
Old Mumbai Pune Road, Wakadewadi

Shivaji Nagar, Pune 411003

Índia

Telefone: +91 20 6634 6600

E-mail:

Vector Informatik India Pvt. Ltd.

No 11-14, 5th & 6th floor, Tara Heights,
Old Mumbai Pune Road, Wakadewadi

Shivaji Nagar, Pune 411003

Índia

Telefone: +91 20 6634 6634

E-mail:

Vector Informatik India Pvt. Ltd. – Bengaluru office

Kalyani Solitaire 2nd & 3rd Floor
No.165/2, Krishna Raju Layout
Doraisanipalya, Off Bannerghatta Road

Bengaluru 560076

Índia

Telefone: +91 80 6822 9600

E-mail:

Vector Informatik India Pvt. Ltd.

No 11-14, 5th & 6th floor, Tara Heights,
Old Mumbai Pune Road, Wakadewadi

Shivaji Nagar, Pune 411003

Índia

Telefone: +91 20 6634 6600

E-mail:

VecScan AB

Theres Svenssons Gata 9

417 55 Gothenburg

Suíça

Telefone: +46 31 764 76 00

Fax: +46 31 764 76 19

E-mail:

VecScan AB

Theres Svenssons Gata 9

417 55 Gothenburg

Suíça

Telefone: +46 31 764 76 00

Fax: +46 31 764 76 19

E-mail:

VecScan AB

Theres Svenssons Gata 9

417 55 Gothenburg

Suíça

Telefone: +46 31 764 76 00

Fax: +46 31 764 76 19

E-mail:

VecScan AB

Theres Svenssons Gata 9

417 55 Gothenburg

Suíça

Telefone: +46 31 764 76 00

Fax: +46 31 764 76 19

E-mail:

VecScan AB

Teknikringen 9

SE-583 30 Linköping

Suíça

Telefone: +46 (0)13–560 18 14

Fax: +46 31 764 76 19

E-mail:

Vector North America

66 Bovet Road, Suite 300

San Mateo, CA 94402

EUA

Vector North America

66 Bovet Road, Suite 300

San Mateo, CA 94402

EUA

Vector North America

66 Bovet Road, Suite 300

San Mateo, CA 94402

EUA

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670-0

E-mail:

Address for Deliveries:
Motorstr. 56
70499 Stuttgart
Germany

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 200

E-mail:

Business hours: Monday to Friday from 8:30 am to 5:00 pm (CET/CEST).

Online: https://portal.vector.com

Vector Informatik GmbH

Visitor Address: Holderäckerstr. 36

70499 Stuttgart

Alemanha

Telefone: +49 711 80670 500

E-mail:

Exibir no mapa
Selecione a sua região

1. Região

Selecione um continente/país:

Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
Your region/language settings differ from the requested site. Do you want to change to suggested region/language?
shoppingcart

GB/T 27930

Know-how

Chinese Protocol for Communication Between Chargers and Electric Vehicles

GB/T 27930

GB/T 27930 is the Chinese standard for electric vehicle battery charging. Other charging systems include the Combined Charging System (CCS) favored by European and American manufacturers, the CHAdeMO charging standard developed by a Japanese industrial consortium and Tesla’s Supercharger.

The GB/T 27930 charging standard for cable and conductive charging developed in China is suitable for both electric vehicles (EV) and hybrid electric vehicles (HEV) alike. The GB standard (Guobiao, or “national standard” in Chinese) was published by the China Electricity Council (CEC). A separate specification for inductive or wireless charging was published by the CEC as GB/T 38775.

Cable charging standard GB/T 27930 is based on the SAE J1939 network protocol and uses the CAN bus with a point-to-point connection between the charger and the battery management system (BMS).

Figure 1 – GB/T 27930: A cable charging standard based on SAE J1939

Characteristics

  • Uses the CAN bus
  • J1939-based protocol
  • Primary CAN baud rate of 250 kbit/s with reduction down to 50 kbit/s possible
  • Only two participants at a time – a charger and a BMS in the vehicle – with fixed addresses:
    • 86 (56h) for the charger
    • 244 (F4h) for the BMS
  • No direct connections to other CAN systems in the vehicle, such as the power train CAN.
  • Diagnostic options: Six diagnostic messages – DM1 through DM6 – are defined (not compatible with SAE J1939).

Protocol

GB/T 27930 – Based on SAE J1939

The current version of the standard is GB/T 27930-2015 from 2015, which replaced version GB/T 27930-2011. GB/T 27930 is based on SAE J1939 and uses a CAN bus accordingly, but this is just a point-to-point connection between the charger and the BMS. There are no direct connections to other CAN systems in the vehicle, such as the power train CAN.

 

  Based on SAE J1939
CAN IDConsisting of the priority, PGN, SA and DA.
Transport ProtocolDA-specific  data transfer only also known as RTS/CTS or CMDT (see SAE J1939-21).
Network ManagementNodes are identified by their addresses: 
-    Charger: 86 (56h)
-    BMS: 244 (F4h)
Baud RateDefault transfer rate: 250 kbit/s.
Diagnostic MessagesNames of the diagnostic messages: DM1 through DM6 .
DTCConsisting of the SPN, FMI and OC.
   

GB/T 27930 and SAE J1939 – Differences at a Glance

Despite being heavily based on SAE J1939, a few significant differences have to be taken into account, such as there being no address arbitration with GB/T 27930 according to SAE J1939-81. As a result, parameter groups for address claiming, commanded address and name management are not defined. This is logical and consistent, as the charger and vehicle are always the only participants involved when it comes to charging communication. The specification clearly defines their addresses: 86 (56h) for the charger and 244 (F4h) for the BMS. As the Request mechanism of SAE J1939-21 is used solely for diagnostics, neither the ACKN (PGN E800h) nor Request2 (PGN C900h) nor Transfer (PGN CA00h) parameter group is present.

We recommend using caution when it comes to diagnostic messages – GB/T 27930 uses the designations DM1 through DM6 and packs the information on arising problems into DTC (diagnostic trouble code) blocks as described in SAE J1939-73, but this is where the similarities end. Unlike names, parameter group numbers (PGNs) are defined differently from J1939 and the DTCs do not start with byte 3, but rather byte 1.

 

  Difference from SAE J1939
CAN IDNo variations for priority, source address (SA) or destination address (DA).
DLCMessages with message lengths (DLCs) shorter than eight are allowed.
Transport ProtocolNo BAM.
Network Management

Dynamic address changing is not possible, and no AC, NM or CA is defined.

Baud Rate

If the line quality is poor or external interference fields are influencing communication, a reduction from 250 kbit/s to 50 kbit/s is permissible.

A baud rate of 500 kbit/s is not defined.

Message DefinitionDefined differently than in the J1939 Digital Annex. 
Diagnostic MessagesIDM1 through DM6 are defined differently than in J1939-73. DTCs do not start with byte 3 as described in J1939-73, but with byte 1 instead. 
DTCSPN and FMI are defined differently than in J1939-73 and the J1939 Digital Annex.
   

GB/T 27930 – Comparison of Versions 2011 and 2015

The current version of the standard is GB/T 27930-2015 from 2015, which replaced version GB/T 27930-2011. In addition to editorial changes, GB/T 27930-2015 differs from the preceding version in terms of the following technical modifications:

 

  GB/T 27930-2011GB/T 27930-2015
New Message TypeCHM, BHM
J1939 PriorityPriority 6 for:
RM, BCP, BCS, BMV, BMT and BSP

Priority 7 for:

BRM, BCP, BCS, BMV, BMT and BSP

Message Period1 s for
BMV, BMT and BSP
10 s for
BMV, BMT and BSP
Message Layout:
– BRM Length41 Byte 49 Byte
– BCP: SPN2822Total voltage Current voltage
– BST: SPN35113 suspending reasons 4 suspending reasons.
Added:
- “charger actively suspends”
– BST: SPN35126 suspending reasons

8 suspending reasons.

Added:
- “high voltage relay fault”

- “voltage detection fault”
– CRM: SPN2561Length: 1 Byte Length: 4 Byte
– CRM: SPN2562Length: 6 Byte, optional Length: 3 Byte, mandatory
– CCS Length6 Byte 8 Byte
– CCS: SPN3929Not defined Mandatory
– CSD Length5 Byte 8 Byte
– CSD: SPN36131 Byte 4 Byte
– CML Length6 Byte 8 Byte
– CML: SPN2827Not defined Mandatory
Timeouts:
– BCL100 ms 1 s
– BCS5 s
– CCS100 ms 1 s

Communication Phases

Overview

Charging communication primarily involves both the battery management system and the charger agreeing on the power requirements of the vehicle and both the amperages and voltages used during charging, as well as monitoring the charging process. With the GB/T-27930 protocol, communication is divided into the following phases during the charging process:

Figure 2 – Communication phases during the charging process

1) Handshake Initiation

The first phase of communication is started once the charger and vehicle are connected with the charging cable. The charging process has not yet begun at this point, i.e. current is not flowing. The connection is checked, and the vehicle informs the charger of the maximum permissible charging voltage.

 

2) Handshake Recognition

In the handshake recognition phase, the charger connection check is completed and general information such as the protocol version and vehicle information (battery type, vehicle identification number etc.) is exchanged.

 

3) Parameter Configuration

In the parameter configuration phase, the parameters of the charging process are negotiated. The vehicle informs the charger of the permissible amperage and voltage. The charger informs the vehicle of the available amperage and charging voltage.

 

4) Charging

If the requirements of the vehicle can be met by the charger, the charging process is started in the charging phase and the battery is charged. During the charging process, the vehicle informs the charger of the current charge status of the battery at regular intervals.

 

5) Suspension of Charging

In the suspension of charging phase, either side can terminate the charging process. Reasons for this can include the battery being fully charged or a fault occurring during the charging process.

 

6) End of Charging

In the end of charging phase, the charging process is terminated and the charger stops outputting power.

 

In each phase of charging communication, the charging process can be terminated in case of a fault. The charger then has the option of restarting the charging process.

Phases 1 Through 4:
Messages and Status Transitions

Phases 1, 2, 3, 5 and 6 work according to the same principle. Participant 1 begins by sending a data record, e.g. a CHM (charger handshake message). Participant 2 then receives the CHM and carries out the corresponding action, e.g. by checking the connection. To signal that it has successfully carried out the action, participant 2 begins sending a BHM (BMS handshake message) to participant 1. As soon as participant 1 has received the BHM, it starts the corresponding action on its part and checks compatibility, for example. Once the task is complete, it begins sending another message. The procedure is like a soccer game in that two players reach the opponent’s goal or target by continually passing the ball back and forth to one another (Figure 3)

Figure 3 – Charging process: Phases 1 through 4 with all relevant messages and status transitions

Phases 4 Through 6:
Messages During the Power Transfer

In phase 4, the actual charging process, communication is considerably clearer, as status transitions no longer occur. BMS and Charger send their messages to each other cyclically and independently.

The vehicle initiates the charging process. The vehicle sends the requirements to the charger using the BCL (battery charging demand) message and informs it of its own status using the BCS (overall battery charging status) and BSM (power storage battery status information) messages. There are also three optional messages with which the vehicle can provide additional information on its internal status to the charger while charging: single power storage battery voltage (BMV), temperature of power storage battery (BMT) and reserved message of power storage battery (BSP).

The charger, on the other hand, sends the CCS (charger’s charging status) message and informs the vehicle of its status, the current being provided and the maximum voltage which can be generated.

The charging process lasts until either the battery management system or the charger initiates the end of charging. This happens either when the battery is fully charged, the specified charging duration is reached or the passengers wish to continue traveling without a fully charged battery (Figure 4).

Figure 4 – Termination of the charging process initiated by the BMS

Fault Handling

Problems While Charging

As is the case with every other bus protocol, various problems can occur with GB/T 27930. These faults can be divided into the following categories:

Figure 5 – Problems, errors and faults while charging

Communication Errors

These errors are general in nature and can occur during any phase of the process. This is why the procedure is always the same. The participant which identifies such an error stops its regular bus communication and power output (charger) or power intake (BMS). Instead, it begins cyclically sending the corresponding error message (the charger uses the CEM message, and the BMS uses the BEM message). The other participant must respond accordingly and stop its communication as well.

 

Technical Faults

Faults of this type can actually only occur in the charging phase. They are reported as a regular request to terminate the charging process and are treated accordingly (Figure 4). The fault causing the message is reported in the corresponding suspending message here (CST for chargers, and BST for the BMS).

Conformity and Interoperability Tests

Test Specification GB/T 34658

Closely associated with GB/T 27930 is another standard which describes the testing of a BMS and charger: GB/T 34658. This includes definitions of a total of 85 test cases (42 for the BMS and 43 for the charger) structured according to the following scheme:

  • First, the test hardware (either the BMS or the charger) is tested under optimum conditions. The testing system operates strictly according to the specifications of the GB/T 27930 standard, where all messages are sent in the correct format and with the correct cycle time, all transferred information is valid, all status transitions occur at the right time. For its part, the test hardware must change its status at the right time and send suitable messages in a correct format and with the correct cycle time. There is always a suitable test case for each status change: 14 for the BMS and 15 for the charger.
  • Following this, a test is carried out to determine whether a protocol violation was correctly identified and signaled by the test hardware. Possible violations include, among other things:
    • Incorrect cycle time of a specific message
    • Premature or delayed status change
    • Messages with inconsistent contents

To pass this test, the test hardware only needs to identify the deviation from the standard as a fault if the deviation exceeds a threshold defined in the standard. Ignoring a violation is also identified as a fault, just like switching to fault mode too quickly. There are 28 test cases for both the BMS and the charger here.

Further Development

Chaoji: Harmonization of the Japanese CHAdeMO Charging Standard and the Chinese GB/T Standard

In 2018, cooperation on development of a new charging standard called ChaoJi was announced by the publishers of the two national standards: CHAdeMO by the CHAdeMO Association in Japan, and GB/T 27930 by the China Electricity Council (CEC) in China.

The goal of the new standard is secure, versatile and rapid charging technology (up to 900 kW) using a standardized charging protocol and standardized physical infrastructure.

Figure 6 – ChaoJi: A new standard for ultrafast charging based on cooperation between the China Electricity Council (CEC) and the CHAdeMO Association

In the first step, a new connecting plug is being developed. Using adapters, it must also be possible to charge vehicles which only support the CHAdeMO or GB/T standard at ChaoJi chargers.

The CHAdeMO and GB/T 27930 communication protocols will both continue to be supported for the time being. Version 3.0 of CHAdeMO, which contains protocol enhancements for negotiation of the charging protocol to be used (CHAdeMO or GB/T 27930) with a ChaoJi charger, has been published. A new version of the GB/T-27930 specification with modifications for ChaoJi is expected in 2021. There are plans for a new, standardized charging protocol, but it will not be implemented until later on so as to ensure backward compatibility with existing vehicles.

Figure 7 – Interoperability and backward compatibility

Videos

Don't feel like reading? Then take a look at the videos.

GB/T 27930: Overview About the Chinese Charging Standard
GB/T 27930: Overview About the Chinese Charging Standard
GB/T 27930: Analysis and Simulation in CANoe
GB/T 27930: Analysis and Simulation in CANoe.

Technical Article

DEVELOPMENT STANDARDS

Charging Communication in Chinese

Developing and Testing GB/T-27930-compliant Electric Vehicles and Chargers

Electric mobility plays an important role in China in particular, as an ever-increasing number of vehicles on the streets there are electric. This requires the availability of extensive charging infrastructure. Standards like GB/T 27930 are necessary for ensuring that electric vehicles and chargers can communicate reliably with one another.

Related Pages

Solutions for E-Mobility
Test systems and ECU software for charging ECUs, charging stations and induction charging systems.
CANoe Test Package EV
Powerful test library for EVs: automated conformance & interoperability tests.
CANoe.SmartCharging
Analyzing, simulating and testing charging communication.