VN1530/VN1531 - the CAN/LIN Bus Connections via PCIe
The CAN/LIN network interfaces VN1530 and VN1531 are ideally suited for accessing CAN and LIN networks via the PCIe interface.
Due to its various channel combinations for the bus connections to CAN(FD), LIN, K-Line and SENT VN1530 and VN1531 are optimal interfaces for test benches, test PCs and rack use.
Advantages
- 4 onboard channels (VN1530: 4xCAN (FD), VN1531: 4xLIN)
- 2 additional, flexibly useable channels via Piggybacks*
- Advanced LIN stress e.g. for LIN 2.1 conformance tests
- Synchronization of multiple devices and other bus systems like CAN (FD), LIN, FlexRay, MOST, Ethernet
- Optimal performance for CANoe, CANalyzer, CANape or customer applications:
- 100% bus load on all channels supported
- Minimal latency times
- Low host CPU load
* Please find a list of compatible Piggybacks on the Vector Homepage: https://kb.vector.com/entry/219/
Overview about the VN1530/VN1531 Family
VN1530
VN1530
VN1531
VN1531
Application Areas
- Analysis, simulation and test of ECUs, sensors, actuators and gateways
- High performance remaining bus simulations
- Measurement and calibration of ECUs via XCP
- End of line testing and flashing
- Precise timing analysis of communication data
- Setups with a high number of CAN and/or LIN channels
- Customer-specific applications
Functions
CAN and CAN FD support
- CAN: up to 2 Mbit/s
- CAN FD: up to 8 Mbit/s
- Fast CAN Flashing / CAN Transport Protocol acceleration
LIN support
- Support for LIN 2.1 conformance tests with CANoe
- Stress functionality, e.g. disturbance of dominant and recessive bits
- LIN Flash Mode support up to 300 kbit/s
General
- Support of K-Line
- Support of SENT (starting with CANoe/CANalyzer Version 12.0)
- Hardware and software time synchronization
- Support of customer applications via free XL-Driver
- Library (XL-API)
- Support of CANoe/CANalyzer starting with Version 11.0 SP3
Product Descriptions
- Short overview of facts (PDF)
- Manual (PDF)
Show more
| VN1530 | VN1531 | ||
|---|---|---|---|
| Max. channels | 6 | 6 | |
| Onboard channels | 4 x CAN (FD) - NXP TJA1057G - electrically decoupled | 4 x LIN - TLE7269 - electrically decoupled | |
| Variable channels | 2 | 2 | |
| - CAN channels | Max. 2 configurable via Piggybacks | ||
| - LIN channels | Max. 2 configurable via Piggybacks | ||
| - K-Line channels | Max. 1 at channel 6 (with LINpiggy 7269mag) | Max. 1 at channel 5 (with onboard LIN transceiver TLE7269) | |
| - SENT channels | Max. 1 at channel 3/6 (with SENSORpiggy SENT) | Max. 1 at channel 6 (with SENSORpiggy SENT) | |
| Baudrates | CAN: up to 2 Mbit/s CAN FD: up to 8 Mbit/s LIN: up to 300 kbit/s | ||
| Time stamps | Resolution: 8 ns Accuracy (within one device): 1 μs Accuracy software sync: typ. 10 μs Accuracy hardware sync: typ. 1 μs | ||
| Connectors | - DSUB 15 HD (automotive bus systems) - Binder type 711 (synchronisation) | ||
| Power consumption | 4.5 W | ||
| Temperature range operating | -40 °C...+65 °C | ||
| Temperature range shipping and storage | -40 °C...+85 °C | ||
| Relative humidity of ambient air | 15 %...95 %, non-condensing | ||
| Dimensions (LxWxD) | Approx. 132 mm x 127 mm x 22 mm (with mounted Piggybacks) | ||
| Weight | Approx. 105 g (without Piggybacks) | Approx. 105 g (without Piggybacks) | |
| PC connection | PCIe | ||
| Operating systems | Windows 10 64 bit, Windows 7/8.1 (32 and 64 bit) | ||
Show more
Downloads
-
2021-05-17Vector Driver Setup 20.30.4
-
2021-02-19XL Driver Library 20.30.14
-
2021-02-04Bus-Transceiver-Overview - for Vector CAN/CAN FD, CAN SIC, LIN, FlexRay and Sensor Buses
-
2021-01-28Accessories for Network Interfaces
-
2020-01-08VN1500 Manual
-
2019-12-12VN1530/VN1531 - CAN/LIN Network Interface
-
2019-02-14New CAN (FD)/LIN Network Interface for PCIe
-
2016-06-29Fact Sheet XL-Driver-Library
News & Events
Show more
- 2020-11-09 - 2020-11-13 Vector Virtual Week
- 2021-04-21 Virtual E-Mobility Symposium 2021
- 2021-04-29 Webinar: VectorCAST: Software Verification of Low Level Requirements in...
- 2021-04-29 Webinar: Coffee with Vector: Faster and Easier Regression Test Automation...
- 2021-05-19 Vector Virtual Software Testing Symposium 2021
- 2021-05-27 Webinar: VectorCAST: Using the Data API to create a custom Report
- 2021-06-09 Webinar: VectorCAST: Introduction to FDA and software testing requirements...
- 2021-06-17 Webinar: Squore: KPI Automation and Consolidation for Tests and...
- 2021-06-23 Webinar: VectorCAST: Using VectorCAST/QA to comply with FDA system level...
- 2021-06-24 Webinar: VectorCAST: Running VectorCAST Unit Tests in a Hardware Emulator
Show more
