Our Specialist for CCS Charging Communication

Easy Analysis of CCS Charging Communication

With VH5110 – also called "CCS Listener" - you can analyze the communication between a charging station (EVSE) and an e-vehicle (EV) based on CCS protocols. The VH5110 "listens" to the data communicated on the Control Pilot Line (CP) via Powerline Communication (PLC) and converts them into Ethernet frames that are interpreted in CANoe. In addition, the PWM parameters of the basic communication are measured and displayed in CANoe as system variables.


  • Very compact size for optimum use directly on the e-vehicle or the charging station
  • Easy handling without complex man-in-the-middle set-up
  • Neutral behavior, therefore no influence on communication
  • Seamless listening to the communication between the e-vehicle and the charging station
  • Flexible connection to the Control Pilot (CP) signal via:

    • direct connection
    • indirect connection by means of inductive coupler around the charging cable


Photo of VH5110 hardware
The compact dimensions are ideal for usage directly on the vehicle or charging station
Photo of Ethernet connector for connection to CANoe
Ethernet connector for connection to CANoe
Photo of connections for power supply and Control Pilot signal
Connection for power supply and Control Pilot signal

Application Areas

Neutral, seamless listening of the CCS communication between e-vehicle and charging station:

  • in the vehicle for testing during ECU integration
  • in the field, when analyzing interoperability problems or interrupted charging
  • in the test vehicle for continuous recording of the charging processes in connection with a data logger


  • Measurement of voltage, frequency and duty cycle of PWM communication according to IEC 61851
  • Listening to PLC communication and convert to Ethernet frames for display and analysis in CANoe
  • Seamless listening of SLAC and V2G messages of the DIN 70121 and ISO 15118 protocols
  • Full compliance with the HomePlug Green PHY specification
  • Listening to the HomePlug specific communication between the PLC nodes

Technical Data

Power supply connections 1x MQS (connection cable included in delivery)
Connections for communication
1x BNC for CP signal
1x Ethernet (10/100 Mbit/s) for CANoe
Power supply Typ. 12 V
Power consumption Typ. 1,000 mW
Operating system requirements Windows 10 (32 bit or 64 bit)
Software requirements
CANoe (version 12.0 SP3 or higher)
CANoe Option .Ethernet
Supported standards HomePlug Green PHY v1.1
Temparature range Operation: 0 °C … +85 °C
Dimensions (LxWxH, incl. BNC connector) Approx. 115 x 110 x 35 mm
Weight Approx. 230 g

Product Descriptions

Fact Sheet:

User Manual:

Show more

Verwandte Produkte

Benefit from Further Vector Solutions:

E-Mobility Know-how

Test systems and ECU software for charging ECUs, charging stations and induction charging systems.

More Information
CANoe .SmartCharging

Analyzing, simulating and testing charging communications.

Go to Page
CANoe Test Package EV | Testing Electric Vehicles

New powerful test library for electric vehicles: Automated conformance & interoperability tests.

Go to Page
Smart Charging With vSECC

Get to know our universal control unit for intelligent charging stations. Starter kit now available!

Go to Page