Contact
Download
With Service Pack 5 (update to 7.2 build 72), the following changes become effective:
General:
- VN8900: CANalyzer now supports the new device familiy VN8900. VN8900 is a compact high-performance device, which combines ease of use (plug & play via USB) with real-time capabilities. For that purpose the blocks from the CANalyzer send branch are executed on the VN8900 device.
Diagnostic Feature Set:
- Re-use of previously defined diagnostic services between basic diagnostic ECUs (Import & Export of service descriptions in the Basic Diagnostics Editor)
- Diagnostic repsonses with multiple DIDs can now be interpreted in the Trace Window (UDS "MayBeCombined")
Option .CAN, BAP:
- Parameters of the type TString_6Bytes are now supported.
Option .MOST:
- MOST50: The die PCI card of SMSC is now supported as bus interface for high performance simulations and tests, e.g. as needed for MOST High Protocol tests.
- MOST High Protocol observer: The tolerances of each timing or counter parameter of MHP can now be configured separately. This allows for an even more precise adaptation to real ECUs. Thereby well known error situations can be tolerate more easily, whereas critical timing violations are as strictly reported by the protocol observer as in earlier versions.
Option .FlexRay:
- The key slot (CAPL FrSetKeySlot) can be configured in onPreStart
Option .IP:
- Ethernet Packet Builder: A UDP checksum calculated to 0x0000 is set to 0xFFFF.
- Remote CAN Analysis: DLC issue with RM CANlink WLAN and RM CANview Ethernet is fixed.
