myVector

    Version History

    2009-03-26: CANalyzer 7.1 SP3 incl. FlexRay, MOST, IP, J1939, J1587, NMEA2000

    Download

    With Service Pack 3 (Update to 7.1 build 65, SP2 is contained), the following changes become effective:

    Hardware Synchronization
    • With recent driver versions, the Virtual CAN channels can now be used in combination with the hardware synchronization. This allows replacing unnecessary CAN channels of a multi channel configuration with virtual channels without disturbing the synchronization of the other channels.
    CAPL Browser
    • Errors in include files are shown in the message window of the include file, too
    BAP
      CAPL now supports to comfortably implement filters for BAP messages in the measurement setup and the access to the BAP properties of CAN messages
    • The disassembly of BAP messages in the Trace window was improved especially when no function catalog is available
    MOST
    • The MHP observer now supports MOST High Protocol version 2V3
    • The Interactive Generator Block (MOST IG) now diplays special characters correctly even in UTF-8 format.
    • Synchronous channels and Audio
    • The streaming DLL now can export wave files with a sample rate of either 44.1 kHz or 48 kHz. With CANoe/CANalyzer versions from 7.1 SP3 on, the sample rate of the wave file is automatically adapted to that of the MOST ring. With older versions the user can call a CAPL API to set the sample rate manually.
    • The concurrent use of the Audio window and CAPL functions to program the routing engine now works without interference.
    • The Online Help now contains extensive assistance for the use of LineIn/LinOut, streaming over S/PDIF and streaming of audio via USB.
    • The Trace window now takes the Instance ID of messages into account, when disassembling the function block names. This is helpful with function catalogs of some specific OEMs and in projects where proprietary function blocks can be identified via Instance ID.
    • The functionblock monitor window can now be opened from the MOST tool bar
    • Logging formats
      • IMG Logging files now contain only valid SBC-Events
      • OP2 is available again as logging file format
    FlexRay
    • FlexRay Frame Panel
    • Support of In-Cycle Repetition frames
    • The Leading Coldstart flag in the FlexRay Frame Panel can be used for the FlexCard Cyclone 2/SE
    • General
      • The node filter can be configured with FIBEX+ databases too.
      • Display of the Clock Correction Failed Counter in Start Cycle event (only VN Interface)
      • The statistic protocol evaluates Cycle Multiplexing and In-Cycle Repetition frames. The frame name instead of the numeric identifier can be displayed .
    • FIBEX Explorer
      • Performance improvement
      • Display of the PDU position in the schedule view
    IP
    • Option .IP is available as demo version.
    • Multibus systems are fully supported now.
    • Extensions and optimizations in the Trace window (DHCP options, additional columns, ACK flag, URG flag)
    • Ethernet Packet Builder:
      • The checksum is calculated only on modification of a packet. (before: an selection of a packet)
      • The packet selection remains after switching between windows or desktops.
      • Addition or removal of the options field in the IP header does not result in the modification of the payload data.
    • The Ethernet driver's stability is optimized. Additional status information is output in the Write window.
    J1939
    • The Diagnostic Memory Access window is adapted to the latest specification (memory access is completed with DM14).
    • Now the J1939.dbc is enhanced by multiplexors for tire and axle specific PGNs. SPNs of the manufacturer specific number range are assigned to the multiplexed signals.
    • The display of J1939 string signals in the Trace window is corrected.
    • The selection/deselection of nodes in the DTC Monitor is reworked.
    • J1939-Scanner: The help provdies more detailed information for the tabs Nodes and Network.
    NMEA2000
    • The Diagnostic Memory Access window is adapted to the latest specification (memory access is completed with DM14).
    • The display of J1939 string signals in the Trace window is corrected.
    • The selection/deselection of nodes in the DTC Monitor is reworked.
    • J1939-Scanner: The help provdies more detailed information for the tabs Nodes and Network.
    J1587
    • The problem with DataLinkEscape (PID 254) is resolved.
    • Additional J1587 demos can be started from the start menu.

    more about CANalyzer...

    © 2010-2012 Vector Informatik GmbH
    Bookmark and Share
    Print this page | Imprint | Subscribe to this page