Version History

2011-07-28: CANalyzer 7.6 SP2

Download

With Service Pack 2, the following changes become effective:

General:

Trace Window
- Messages with different multiplexors can be displayed in fixed mode position of the Trace window as separate rows. This function enhances the clarity when working with multiplexor signals. In the global configuration dialog you can set this functionality for CAN based protocols and FlexRay.
- The default setting for displaying signals has been changed to sorting by startbit.
- Display of system variables with namespaces in offline mode
- The fixed position mode now shows more lines
Value Tables can be assigned to system variables of type Integer-Array, too.
You can now use the Window menu to easily create screenshots of the windows.
The panel converter from old Editor panels to modern Designer panels now creates conversion problem messages with more to ease reoperation.
Global Markers can now be used in the Graphics Window.

BAP:

The Trace window provides an analysis filter for BAP messages. Trace contents can be filtered by drag & drop of BAP messages into the Trace-Analysis Filter. The filters then can be configured in order to filter all messages of a certain logical device, a certain function etc. Heartbeat messages can be shown or hidden on the press of a button.
Several SW configuration files can now be assigned to a CAN channel to accumulate a complete system description from these files.

Option .MOST:

MOST150
- Ethernet-Spy can now separately be enabled/disabled to avoid overload with very busy Ethernet channel.
- Trace window now shows more details of message fragments
S/PDIF Ports of VN2610 (MOST25) and VN2640 (MOST150) can now be controled from MOST Audio window.
FBlockMonitor: User defined views can now be exported to a file and reused in new configurations.

Option .Car2x:

Option Car2x is available as demo version
manual for open interface between CANalyzer.Car2x and WLAN device is available at http://www.vector.com/vi_car2x_interfaces_en.html.
connection to WLAN device: improved robustness regarding high packet load
WLAN Hardware Configuration dialog: indication of available WLAN devices and WLAN interfaces.
WLAN Packet Builder:
- Multiple packets can be copied from trace window to WLAN Packet Builder
- WLAN interface's MAC-Id can be used for packet configuration

Option .IP:

Issue with logfiles containing more channels than configured resolved
IP Filter Block: improved GUI and usability
Ethernet Packet Builder:
- Field DoIP payload length (doip.length) integrated in length calculation
- Storage of window's name in configuration file
- Improved GUI and usability

Option .J1939:

Trace Window: multiplexed parameter groups can be displayed individually for each multiplexer value.
DTC Monitor: parameter group DM22 - Individual Data Clear/Reset (PG 0xC300) is sent with correct SPN and FMI.
Diagnostic Memory Access: storage of window's name in configuration file
J1939 Filter Block:
- Node filters can be created without database by configuration of source address or J1939 Device Name
- Channel = "CAN all" is supported
- Function values below 128 are interpreted independent of Industry Group and System
- Improved display and usability
J1939 Node Filter:
- Cannot be inserted anymore, the J1939 filter block with parameter group range filter 0x0..0xFFFF can be used instead.
- Existing configurations with J1939 node filter are still supported
Data Window:
- Parameters with modified addressing are moved/copied correctly from graphic window or another data window.
- Columns for source and destination address do not appear automatically if removed before.
- Improved database connection handling
Graphic Window:
- Parameters with modified addressing are moved/copied correctly from data window or another graphic window.
- Improved database connection handling
Example database J1939.dbc: factors corrected for parameters EnginesDesiredOperatingSpeed (SPN 515) and EstPercentFanSpeed (SPN 975)

Option .J1587: