Home  > Products  > Supported Standards
 

Supported Standards
Supported Standards
+ Distributed Systems
+ ECU Testing
+ Vehicle Diagnostics
+ ECU Calibration
+ ECU Software
+ Process Management
+ Solutions for...
+ Hardware

Vector provides software tools, embedded software and engineering services for the networking of electronic systems in the automobile and related industries. The following industry standards are supported:

Standard CANalyzer is the universal analysis tool for networks and distributed systems. CANoe is a powerful tool that supports the entire development process for networked systems from planning to implementation. Vector's DaVinci Tool-Suite supports you in the design of distributed functions, the definition of software components, and the code integration of networked ECUs. CANape offers you a multifaceted tool that is available for ECU development, calibration, and diagnostics as well as for measurement data acquisition. CANdito - One tool for diagnostic testing and measurement data acquisition CANdelaStudio, CANdelaFlash, CANditoFlash, CANdito, CANoe, CANape, Indigo Products and services around embedded software in the automobile
ARINC 8xx
CANalyzer.CANaerospace can be extended for the protocol ARINC810 / ARINC812.
CANoe.CANaerospace can be extended for the protocol ARINC810 / ARINC812.
ASAP2
CANape contains an editor for ECU description files in ASAP2 format.
AUTOSAR
Graphically define AUTOSAR Software Components with DaVinci.
AUTOSAR Basic Software
CAN
Observe, analyze and supplement data traffic in CAN systems.
Test, develop and analyze your CAN control units and networks with CANoe.
Design in-vehicle networking architecture and network data communication with DaVinci.
Measure and calibrate parameters on the CAN bus with CANape.
Diagnostic testing, flash programming and measurement data acquisition on the CANbus.
Import and export of ODX data with CANdelaStudio, integrated ODX viewer.
Embedded software components for in-vehicle CAN applications.
CANaerospace
Observe, analyze and supplement data traffic in CANaerospace systems.
Test, develop and analyze your CANaerospace control units and networks with CANoe.
CANopen
Observe, analyze and supplement data traffic in CANopen systems.
Test, develop and analyze your CANopen control units and networks with CANoe.
Source Code for easier implementation of CANopen devices.
CCP
Physical interface between CANape and the ECU e.g. via CAN bus with CCP.
CAN Calibration Protocol
Ethernet / IP
CANalyzer: analysis tool for embedded systems with CAN and Ethernet.
CANoe: develop, simulate and test your embedded systems with CAN and Ethernet.
FlexRay
Observe, analyze and supplement data traffic in FlexRay systems.
Test, develop and analyze your FlexRay control units and networks with CANoe.
Design your FlexRay network with DaVinci Network Designer.
Measure and calibrate parameters on the FlexRay bus with CANape.
Vector provides the functions of the FlexRay basic software in clearly structured modules.
ISO11783
Test, develop and analyze your ISOBUS control units and networks with CANoe.
Embedded software components for SAE-J1939 and protocols based on J1939.
ISO14229 (UDS)
KWP2000 and UDS diagnostic communication can be analyzed with the Diagnostic Feature Set contained in CANoe.
CANape supports ISO 14230 (KWP2000 on CAN) and ISO 14229 (UDS) with the Diagnostic Feature Set.
Diagnostic testing, flash programming and measurement data acquisition with CANdito.
CANdelaStudio optimizes the development process for vehicle diagnostics.
ISO14230 (KWP2000)
KWP2000 and UDS diagnostic communication can be analyzed with the Diagnostic Feature Set contained in CANoe.
CANape supports ISO 14230 (KWP2000 on CAN) and ISO 14229 (UDS) with the Diagnostic Feature Set.
Diagnostic testing, flash programming and measurement data acquisition with CANdito.
CANdelaStudio optimizes the development process for vehicle diagnostics.
J1587
Simulation and analysis of SAE J1587/J1708 networks.
Simulation and analysis of SAE J1587/J1708 networks.
J1939
CANalyzer with additional functions to analyze networks based on J1939.
Simulation and development of J1939 systems with CANoe.
CANape supports J1939 monitoring.
Vector offers embedded components for J1939
LIN
Observe, analyze and supplement data traffic in LIN systems.
Test, develop and analyze your LIN control units and networks with CANoe.
Measure and calibrate parameters on the LIN bus with CANape.
Diagnostic testing, flash programming and measurement data acquisition on the LIN-bus.
Embedded software components for Local Interconnect Network according to LIN 1.2/1.3/2.0/2.1.
MOST
Observe, analyze and supplement data traffic in MOST systems.
Test, develop and analyze your MOST control units and networks with CANoe.
NMEA 2000
Observe, analyze and supplement data traffic in NMEA 2000 systems.
Test, develop and analyze your NMEA 2000 control units and networks with CANoe.
Embedded software components for SAE-J1939 and protocols based on J1939.
ODX
CANoe.DiVA executes test cases based on ECU diagnostic descriptions in ODX or CANdela format.
CANape displays diagnostic data in the ODX Viewer.
CANdito: tool for diagnostic testing, flash programming and measurement data acquisition.
Overview with ODX-compatible software from Vector.
OSEK/VDX
osCAN is a preemptive real-time multitasking operating system with properties that are optimized for use in microcontrollers.
XCP
You can use CANoe to access the ASAM-MCD3 interface of CANape.
CANape supports XCP on CAN, FlexRay, Ethernet, USB, RS232, SPI, SCI, LIN 1.3 and 2.0.
Vector XCP modules can be optimally integrated in the ECU together with the AUTOSAR communication stack.

Did you find this page helpful?        
Print this page | Imprint | Add page to favorites

© 2006-2010 Vector Informatik. Last modified: 2010-02-12