News

2008-02-26: CANape 6.5 SP3

Download

Die folgenden Änderungen werden mit Service Pack 3 (Update auf 6.5 Build 30) wirksam, SP1 und SP2 sind enthalten:

General:

Unknown window types of configurations from higher application versions are ignored now. The configuration is read without an error.
Problem fixed in case of moving the global cursor in pause mode during measurement.
Database editor can be closed even there is a invalid curve dimension.
Problem fixed if moving an icon of the toolbar is cancelled with ESC.
Fix permanent redraw of the measurement configuration dialog if this dialog is placed on a second monitor left of the main monitor.
The file name of a CAN device logging file can be extended by the device name to get unique names.
Performance of the measurement configuration dialog for very large configurations improved.
There is a warning message if a project or a configuration from a higher application version is loaded.
Signals from measurement files can be displayed during measurement.
Issue with measurement configuration dialog fixed.
Fixed issue when loading an A2L file having more than 64 memory segments.
Problem fixed of the ELF map file reader in case of more then 16000 source files.
Problem fixed of the ELF map file reader in case of bit field members crossing byte borders.

Function and Scripts:

Only save a description of the referenced global variables into the configuration.

Communication Protocols:

CAN Remote frames are logged as remote frames into the CAN device logging file.
Improved Tracing of XCPonFlexRay messages (cycle, channel and XCP-NAX).
Decrease Reconnect delay in Datalogger mode (when restarting measurement).
Fixed issue when measuring multiplexed FlexRay signals.
Fixed issue when measuring FlexRay signals having multiple conversion rules.
Improved XCPonFlexRay dynamic bandwidth distribution.
Support FlexRay bus logging to file (BLF).
Support VX11xx CAN channels for CAN monitoring.
Added XCP specific driver setting to suppress automatic reading of XCP event definitions.
Fixed issues related to XCP static DAQ lists.
Improved error handling when unplugging ethernet cable of active XCP connection.
Added warning in case of duplicate or missing XCP DAQ data.
Fixed timestamp issue when running long XCP measurements > 12 h.
Support VN7600 interface hardware.
Fixed data loss issue for ethernet based XCP on multicore computers.
Fixed connect abort which occurred in case of error frames on CAN bus.
Improved error report in case of inconsistent FlexRay database configuration.
Generate Datalogger Configuration for XCP on FlexRay (not available for concatenation mode).
Fixed issue which lead to mixed XCP measurement data in case of STIM or static daq lists.
Fixed issue related to test of measurement configuration in case of XCP on FlexRay.
Improved device creation of XCP on FlexRay devices.
Fixed issue which prevented XCP stimulation on PDU based FlexRay networks.
Fixed configuration issue affecting logical FlexRay channel setting.
Fixed issue which lead to inconsistent measurement data in case of FlexRay networks.
Fixed instability issue related to user defined XCP dlls.

MATLAB/Simulink Support:

Tooltip support in the MATLAB Model Explorer hierarchical view and search result.
Always all STIM events of a device are available.

Multimedia:

DivX 6.8 support by setting a registry key during the installation to ignore the DivX setting 'use hardware overlay'.
On adding a multimedia measurement object to the multimedia window it displays the video immediately if the option "Display values from measurement file…" is set.

Data Management:

Correction in calculating the equal state if vlaues of the current device are involved.
Improve load parameter set files for virtual parameters.
Fixed issue if parameter based on datatype FLOAT is stored in PAR format.
Expand the pathname with the correct directory if the filname is not complete during the save parameter set action.
Correction in Checksum algorithm ADD_DWORD_DWORD.
Display correct axis value in parameter explorer window.
Improve detection of format errors in DCM files in case of parsing of double values.
In CDF20 files do not write axis points of common axis / rescale axis or curve axis with their curves and maps itself.

Offline Analysis Measurement Files:

Merging of unsorted and write protected MDF files is possible now.
Merging of MDF files is possible too if the source MDF files have records with and without record identifiers.
Signal value comments of a measurement file are saved if the measurement file is replaced by another file using the command "Display from measurement file".
The automatic zooming of a graphic after inserting a file signal can be reverted with one click even multiple signals are inserted.
Import converter for CANcase XL Log logging files optionaly generates a signal for the SyncPulse events.
Import converter for Logging files support conversion rules from FIBEX databases.
Import converter for Logging files reports an error if a unsupported file format is selected.
Fixed problem of the Logging file import converter under Windows Vista.
The size limit of the label list input field of the ASCII export converter options is removed.
Problem fixed in case of saving measurement file signals using a measurement configuration.

Diagnostics:

Diagnostic Console: Checkbox for automatic parameter initialization disabled in case of ODX.
Diagnostic Console: Improvement of macro recording in case of requests with no response.
CANape API: Possibility to iterate through complex responses.
Fixed problems with automatic script creation (macro recording) for parameter value containing special character '%'.

Fanden Sie diese Seite hilfreich?