| Technical Data |
FlexCard Cyclone II SE / E-Ray |
VN3300 |
VN3600 |
VN7600 |
| Number of channels |
2 FlexRay |
2 FlexRay |
2 FlexRay |
2 FlexRay/3 CAN |
| Area of application |
mobile, stationary |
stationary |
mobile, stationary |
mobile, stationary |
| Usage |
Analysis, stimulation, simulation |
Analysis, stimulation, simulation |
| PC interfaces |
PCMCIA Type II
32 bit CardBus |
PCI
32 bit, 33 MHz/66 MHz |
USB 2.0 |
USB 2.0 |
| FlexRay communication controller (analysis) |
Bosch E-Ray
(Altera Cyclone II EP2C70) |
Bosch E-Ray
(Altera Cyclone II EP2C70) |
| FlexRay communication controller (startup) |
--- |
Fujitsu MB88121B |
| Transceiver |
Integrated (NXP TJA1080) |
FRpiggy (NXP TJA1080) |
| Memory for data transmission |
8 kByte |
2 MB |
Temperature range
Operation:
Storage: |
0..+60 °C
-40..+70 °C |
0..+55 °C
-40..+85 °C
|
| Dimensions (mm) |
85 x 54 x 5,5 |
167 x 107 x 15 |
151 x 110 x 35 |
151 x 110 x 45 |
| Power consumption (typ.) |
1.5 W |
3.2 W |
3 W |
4.5 W |
| Driver library |
TZM FlexCard Library |
Vector XL-Driver-Library |
| Operating system requirements |
Windows 2000, XP/Vista |
Windows XP/Vista (32 bit), Windows 7 (32 and 64 bit) |
| Functions |
FlexCard Cyclone II SE / E-Ray |
VN3300 |
VN3600 |
VN7600 |
| Dynamic reconfiguration of the CC buffers |
--- |
 |
|
|
| Transmission and reception of data and null frames |
|
|
|
|
| Detection of invalid frames |
|
|
|
|
| Cycle multiplexing |
|
|
|
|
| Support of the maximum payload of 254 Byte |
|
|
|
|
| In-cycle response |
|
|
|
|
| Coldstart of the FlexRay cluster without additional node |
|
|
|
|
| Hardware-based incrementing of a payload area |
--- |
|
|
|
| Support of PDU |
--- |
|
|
|
| Startup + asynchronous monitoring |
|
|
|
|
Time synchronization
with synchronization cable
without synchronization cable |
--- |
|
|
|
| Trigger input and output |
|
|
|
|
| Low PC loading due to DMA (Direct Memory Access) |
--- |
|
|
|
| Very short latency period |
--- |
|
--- |
--- |
Contact
Detailed information in the e-paper.
