myVector

Class Descriptions

DE Scandinavia UK North America

Class Descriptions for Germany and all other locations

* Modular means you can book a single day without having to attend for the complete duration of the workshop.

On Mondays classes run from 9:30am to 4:30pm. All other workshop days start at 8:30am and end at 4:30pm.

  • Show all Contents
  • Hide all Contents

Training classes for CMMI, SPICE, and Engineering Methods can be found on the website of Vector Consulting Services.

 

Class Descriptions for Scandinavia

Vector is offering a wide range of training workshops and seminars. Workshops contain exercises and seminars are more theoretical. The training is usually held in Gothenburg, Sweden, but can also be arranged at other locations.

* Modular means you can book a single module without having to attend for the complete duration of the workshop.

Class Modular* Duration
CANoe
CANoe Basic Workshop M
  • Day 1+2: Introduction to CANoe
  • Day 3: Modeling in CANoe
CANoe Test Workshop
  • Day 1, 2 and 3: CANoe Test Workshop
LIN Workshop M
  • Day 1: LIN Fundamentals
  • Day 2: Introduction to CANoe/CANalyzer.LIN
  • Day 3: Expanded Functionality CANoe.LIN
FlexRay Workshop M
  • Day 1: FlexRay Fundamentals
  • Day 2: CANoe/CANalyzer .FlexRay
  • Day 3: Introduction to CANoe models for FlexRay
  • Day 4: CANoe.FlexRay in Practice
CANalyzer | CANister
CANalyzer Workshop M
  • Day 1+2: Introduction to CANalyzer
  • Day 3: Introduction to CAPL Programming
CANister Workshop 1 Day
CANape | CANgraph | XCP
CANape Fundamentals Workshop M
  • Day 1+2: Measurement and Calibration
  • Day 3: "Automated Analysis for Measurement and Diagnostic Data"
CANape with XCP on FlexRay Workshop 1 Day
XCP Fundamentals Seminar 1 Day
CANgraph Workshop 1 Day
CAPL
for CANalyzer Users M 1 Day, part of the CANalyzer Workshop, Module "CAPL Programming"
for CANoe Users M 1 Day, part of the CANoe Fundamentals Workshop, Module "Introduction to CANoe Models"
Diagnostics: CANdela | ODXStudio
CANdelaStudio/Diagnostics Workshop 2 Days
Introduction to ODX M 1 Day, integrated in the ODXStudio Workshop
ODXStudio Workshop M
  • Day 1: Introduction to ODX
  • Day 2: Creation of Diagnostic Data with ODXStudio
AUTOSAR
AUTOSAR Workshop M
  • Day 1: AUTOSAR Basics
  • Day 2-4: AUTOSAR in Practice
  • Day 5: Daimler SLP10 OR
    Day 5: VAG MLBevo/MQB
AUTOSAR Introduction Seminar ½ Day
Bus Systems
Serial Bus Systems in the Motor Vehicle Seminar M
  • Day 1: CAN/LIN
  • Day 2: FlexRay/MOST
CAN Fundamentals Seminar M 1 Day, integrated in the CANoe Fundamentals Workshop and the CANalyzer Workshop
FlexRay Fundamentals Seminar M 1 Day, integrated in the FlexRay Workshop
FlexRay Introduction Seminar ½ Day
LIN Fundamentals Seminar M 1 Day, integrated in the LIN Workshop
Protocols
CANopen Workshop M
  • Day 1: CANopen Fundamentals
  • Day 2: Introduction to CANoe/CANalyzer.CANopen
J1939 Workshop M
  • Day 1: J1939 Fundamentals
  • Day 2: Introduction to CANoe/CANalyzer.J1939
ISO11783/NMEA2000 Workshop M
  • Day 1: ISO11783 Fundamentals
  • Day 2: Introduction to CANoe/CANalyzer.ISO11783 and CANoe/CANalyzer.NMEA
XCP Fundamentals Seminar 1 Day
Embedded Software
CANbedded Workshop 2 Days
CANbedded LIN Workshop 1 Day
CANbedded J1939 Workshop 1 Day
Flash Bootloader Workshop 1 Day
OSEK/VDX Workshop M
  • Day 1+2: OSEK/VDX Operating System Training
  • Day 3: Add-on Training AUTOSAR OS: AUTOSAR Operating System – Training Extended Functionality
eASEE | PREEvision - Development of Distributed Systems
Function Development with PREEvision Workshop 4 Days
Hardware Design with PREEvision Workshop 3 Days
Application Data Management with the eASEE Calibration Solution M
  • Day 1: eASEE Calibration Solution Fundamentals
  • Day 2: eASEE Calibration Solution Advanced Seminar


We also offer customized training courses. Together we find a suitable agenda that meets your requirements.

For further information, please see our schedule table or contact us at academy@se.vector.com.

Class Descriptions for the United Kingdom

Vector GB Limited offers training classes at our office in Birmingham. All classes run from 9:00am to 5:00pm. Most training classes can also be held at your location.

Class Duration Content (extract)
CAN Fundamentals and CANalyzer Workshop 2 Days
  • Introduction to Serial Bus Systems in Motor Vehicles
  • Introduction to CAN
  • Introduction to CANalyzer
  • Measurement and Analysis
  • Offline Analysis
  • ...
J1939 Fundamentals and CANalyzer.J1939 Workshop 2 Days
  • J1939 Documents, Topology, Baud Rates, Terms and Definitions
  • J1939 Network Management
  • Signal Description and J1939 SLOT Definitions
  • Network definitions with the J1939 Database (CANdb++)
  • Main Functions of CANalyzer.J1939
  • ...
CANoe Workshop (CAN and LIN) 3 Days
  • Introduction to serial bus systems in motor vehicles
  • CAN Protocol
  • Fundamentals of the LIN Protocol
  • Measurement, Evaluation and Data Logging
  • Introduction to CAPL
  • Panels in CANoe
  • ...
CANape Workshop 2 Days
  • Introduction to fundamentals of the CCP/XCP protocol
  • Models for synchronous data transfer in CCP/XCP
  • Introduction to CANape
  • Measurement in CANape
  • Functions and scripts
  • ...
ODXStudio Workshop 1-2 Days
  • Introduction
  • UML and XML Basics
  • ODX Sub-Models
  • General Data Model Features
  • DIAG-LAYER-CONTAINER
  • Organisation of ODX Data
  • ...

Class Descriptions for USA, Canada and Mexico

Training available in Novi, MI or at your location

Vector CANtech offers training at our VectorAcademy center in the Novi, Michigan office. These classes cover CAN, LIN, FlexRay and J1939 technology, distributed embedded system engineering and the operation and application of Vector tools.

Most VectorAcademy training classes can also be held at your location. Please contact Vector CANtech's training coordinator to discuss your requirements.

Which class is right for you?

CAN Protocol: Recommended classes:
An overview of the CAN bus systems used by North American OEMs.
An OEM-specific CAN bus system overview.
Vector tools: Recommended classes:
To learn how to use Vector CANalyzer.
To learn how to use Vector CANoe.
To learn how to use Vector CANape and the CAN Calibration Protocol (CCP).
To learn how to use Vector CANdelaStudio for ECU Diagnostic Development.
Embedded Software: Recommended classes:
To learn how to implement OEM-specifc vehicle network software in a module.
Diagnostics: Recommended classes:
OEM-specific overview of module diagnostics on a CAN bus-equipped vehicle.
Did you find this page helpful?
E-Mail:

Please comment:
© 2010-2012 Vector Informatik GmbH | Last modified: 2012-05-15
Bookmark or share this page
Print this page | Imprint | Subscribe to this page