CANoe/CANalyzer Option SCOPE

Integrated oscilloscope solution for CANoe.LIN and CANalyzer.LIN

The Option SCOPE is an integrated oscilloscope solution for CANoe and CANalyzer based on an USB-powered oscilloscope hardware. The hardware PicoScope 4227 has 2 input channels for 1 CAN or 2 LIN and is triggered using the sync line of Vector´s interface hardware. With busspecific trigger conditions and the CANoe/CANalyzer time synchronization, you can find the cause of protocol errors much faster than with any traditional oscilloscope.

Webinar recording:
"Option SCOPE for CANoe/CANalyzer 7.6"
(2011-10-28, duration 45 min.)

Product highlights:

• Bus-specific trigger conditions for CAN and LIN
• Trigger modes: single and repeat
• Trigger and control via CAPL
• Complete decode of protocol errors (e.g. CAN Error Frames)

Applications:

• Bit-accurate analysis of bus protocol errors
• Validation and debugging of conformance tests
• Check of CAN signal quality
• Parallel evaluation of bus and I/O signals

Integration in CANoe/CANalyzer

The option SCOPE appears in CANoe and CANalyzer as a new Analysis window with views for configuration, data capture, Diagram window and Trace window. Diagram and trace are bi-directionally synchronized with each other and provide a bit-accurate signal decode. The Oscilloscope window can also be synchronized with other analysis windows in CANoe/CANalyzer such as Trace, Graphics and State Tracker. Oscilloscope measurements can be exported and imported again for off-line analysis.

Oscilloscope Hardware

• USB-powered precision oscilloscope PicoScope 4227 with carry case
• 125 MS/s sampling rate and 32 MS buffer
• 2 input channels for bus signals (1 CAN or 2 LIN)
• Bus connection via Vector „Scope Bus Probe“ with DSUB connector
• 1 input for external triggering via sync line of Vector interfaces
• Connection to Vector-Interfaces via Scope Trigger Cable
• For more information visit www.picotech.com

continue to "CANoe"...

continue to "CANalyzer"...