Home  > Products  > Hardware  > Logging  > CAN/LIN/J1708 Data Logger Interface
 

CANcaseXL log
Supported Standards
+ Distributed Systems
+ ECU Testing
+ Vehicle Diagnostics
+ ECU Calibration
+ ECU Software
+ Process Management
+ Solutions for...
- Hardware

Two-in-One: Bus Interface and Data Logger for CAN, LIN, J1708 and CCP/XCP

CANcaseXL log combines two products in one device:

  • a professional CAN/LIN/J1708 bus interface with USB 2.0 interface,
  • a reliable and robust data logger for logging bus traffic during test drives or in the test laboratory.

Features and Advantages:

CANcaseXL log equals technically CANcaseXL. Additionally equipped with a memory card interface for SD cards, CANcaseXL log can be operated independent of a PC and can save up to 2 GByte of data from CAN, LIN or J1708 systems. The data logger is configured via its own configuration tool. Measurement data are transferred to a PC by USB or by memory card. There they can be evaluated using CANalyzer, CANoe, CANape, or CANgraph. CANcaseXL log also offers export options to different file formats, like ASCII (as input for MS Excel).
When used as an interface for CAN, LIN or J1708, it has the same excellent features as the Vector CANcaseXL.

Interface Functions:

  • Sending and receiving of Data and Remote Frames
  • Silent mode for listening on a CAN bus without influencing it
  • Detecting and generating of Error Frames
  • Time synchronization
  • Simultaneous operation of multiple devices

General Data Logger Functions:

  • Easy to use graphic configuration tool
  • Logging of CAN, LIN and J1708 message data with memory capacity of up to 2 GByte on SD card
  • Measured values are read out over USB interface at approx. 300 kByte/sec or at approx. 3 MByte/sec using a standard SD card reader
  • Booting time: approx. 1 second
  • Logging speed can handle 100 % bus load at 500 kBit/sec with 2 channels (approx. 4000 messages/sec per channel)
  • File Manager for organizing and converting log files to MDF, BLF and ASCII formats
  • Fast conversion of logging data (about 3 min. for 1 GB)
  • Signaling by buzzer

Detailed information is available in the PDF data sheet Detailed information is available in the PDF data sheet.

    [back to "Overview Logging Solutions"]


    Did you find this page helpful?        
    Print this page | Imprint | Add page to favorites

    © 2006-2010 Vector Informatik. Last modified: 2010-03-03

    • Comparison of logging solutions
      Technical data GL1000 GL1010 CANcaseXL log CANlog 3 CANlog 4 Multilog
      Bus systems
      Logging
      Interface
      CAN, LIN
      --
      CAN, LIN
      --
      CAN, LIN, J1708
      CAN, LIN, J1708
      CAN, LIN
      --
      CAN, LIN
      --
      CAN, LIN, FlexRay, MOST
      --
      Channels 2 x CAN and
      2 x LIN      		 2 x CAN and
      2 x LIN      		 2 x CAN,
      2 x LIN
      2 x J1708
      or combined:CAN/LIN, CAN/J1708, LIN/J1708      		 4 x CAN
      1...8 x LIN       		4 +1 x CAN
      1...8 x LIN      		 8 x CAN
      8 x LIN
      2 x FlexRay
      1 x MOST
      Memory 32 GB (on SD/SDHC card) 32 GB (on SD/SDHC card) 2 GB (on SD card) Internal: 64 MB 64 MB (on flash card) Internal: 100 MB (expandable) 8 GB (on compact flash card, Type 1)
      Data transfer USB USB USB RS232 RS232 / USB WLAN per IEEE 802.11b/g,
      USB for external memory media
      Wake-up, Sleep
      mode functionality      		 Yes Yes No Yes Yes Yes
      Start-up time 150 ms 150 ms 1 s 100 ms 100 ms 50 ms (CAN, LIN, FlexRay)
      1.8 s (MOST)
      Control inputs/
      outputs      		 2 digital inputs and outputs
      (0 V...36 V)
      4 analog inputs
      (0 V...16 V)      		 2 digital inputs and outputs
      (0 V...36 V)
      4 analog inputs
      (0 V...16 V)      		 1 trigger input 2 TTL inputs/output,
      1 output (V24 level)
      Optional: Board with
      choice of digital inputs
      and outputs or analog
      inputs      		 2 TTL inputs/outputs,
      1 TTL output,
      1 output (V24 level)
      Optional: Board with
      choice of digital inputs
      and outputs or analog
      inputs      		 8 digital inputs and outputs each
      Optional: Card with 8 analog inputs
      Supply voltage 5.8 V...30 V 5.8 V...30 V 7 V...33 V 5 V...45 V 5 V...45 V 5.8 V...32 V
      (32 V...36 V for elevated power
      consumption)
      Temperature range -40°...+85 °C (depending on SD card) -40°...+80°C (depending on SD card) Operating:
      -20°...+70 °C
      Storage:
      -40°...+85 °C      		 -40°...+70 °C -40°...+70 °C CAN/FR: -40°...+70 °C
      (without WLAN)
      MOST: -20°..+70 °C
      (without WLAN)
      Dimensions (approx.) 107 x 85 x 35 mm 130 x 85 x 35 mm 105 x 85 x 32 mm 134 × 84 × 35 mm 140 × 144 × 37 mm 190 × 240 × 88 mm

    Related Contents:

    Configuration Tool Download

    The CANcaseXL log config tool is available in the download-center free-of-charge.

    Overview of Characteristics:

    • Two-in-one solution for CAN, LIN and J1708: bus interface and data logger in one device
    • 32 bit microcontroller with 64 MHz
    • 2 independent channels
    • Robust metal housing, ideal for vehicle test drives