CANbedded J1939
Functions:
The following J1939 software components are available:- Expansion of the generation tool GENy and CANgen respectively: software for configuring the J1939, ISO11783, and NMEA2000 components
- J1939 Base Module: expansion of the basic software structure of CANbedded
- J1939 Module Virtual ECUs: use of multiple virtual ECUs in a physical device
- J1939 Transport Protocol BAM
- J1939 Transport Protocol CMDT
- ISO11783 Transport Protocol ETP: typically required for the ISO11783 Virtual Terminal
- NMEA2000 Fast Packet transport protocol
- Dynamic J1939 NMT: dynamic J1939 network management as specified by NMEA2000 and ISO11783
- ISO11783 Working Group Support Module: support of the Support Working Group Master and Member as specified in NMEA2000 and ISO11783
- J1939 Interface for Diagnostics with CANdesc: interface between J1939 and ISO15765 TP (the latter implemented through the CANdesc software module)
- J1939 Interaction Layer: standard access to PGNs via macros for each signal. Signals with fixed length are supported
- NMEA2000 Interaction Layer: standard access to PGNs via macros for each signal. Signals with variable length are supported (string types)
- J1939 Interface to osCAN: interface to the Vector OSEK operating system. Allows configuration of the J1939 components as OSEK task
Special Functions:
Most functional requirements are based on international standards. Vector makes CANbedded available for a highly diverse range of tasks, based on the following specifications:
- ISO International Organization for Standardization
- OSEK Open Systems and their interfaces for Electronics in Motor Vehicles (German abbreviation)
- ASAP Work Group for Standardization of Application Systems (German abbreviation)
- SAE US Society of Automotive Engineers
- NMEA (US National Marine Electronics Association)