CANalyzer.IP, Version 7.2

Option .IP extends the functional range of CANalyzer by adding Ethernet-specific functions and the ability to transmit CAN messages via WLAN or Ethernet.




Special functions

Embedded Ethernet:

• Configuration of up to four Ethernet channels (10/100/1000 Mbps)
• Support of Ethernet and Ethernet-based protocols such as IP, UDP and TCP
• Display of protocol header information in the Trace Window
• Use of your own signal protocol decoder DLLs
• Ethernet Packet Builder for configuring and sending Ethernet packets
• Configurable exclusive use of Ethernet interfaces by CANalyzer.IP

Remote CAN Analysis:

• Transparent transmission of CAN messages via WLAN (requires additional hardware and the bus system option CAN)

New functions in Version 7.2:

• Improvements to Ethernet Packet Builder:
  Support of additional protocols such as DoIP and ICMP. Users may choose to use either fixed source MAC addresses or the MAC address of the current Ethernet adapter. Automatic or manual computation of individual checksums of protocols.
• Access to IP protocols from the Signal Decoder DLL
• Display of Ethernet connection status in graphic and data windows
  
  

 Detailed information is available in the PDF data sheet.

[back to "Overview CANalyzer.IP"]