CANalyzer.IP, Version 7.6 The analysis tool for embedded systems with Ethernet Ethernet-based networks and the protocols built upon them con-tinue Overview of Advantages Embedded Ethernet > Extraction of periodic signals from Ethernet packets and their display in Data and Graphic windows > Send out user-configured (even faulty) Ethernet packets configured with Ethernet Packet Builder > Analyze communication between different networks via gateways > No effect on network communication by the Windows oper-ating to grow in importance in the embedded environment. In contrast to IT networks in the office area, the main focus is on transmission of most periodic signals. Furthermore, real-time Ethernet systems generally react sensitively to disturbances of connected analysis tools. Option .IP lets you extend CANalyzer by adding support of Ethernet systems. Exclusive use of Ethernet interfaces on the PC prevents Windows and other applications from affecting the real-time Ethernet system. Integrating Ethernet in CANalyzer also gives you the ability to transparently transmit CAN messages via WLAN and/or Ethernet (Remote CAN Analysis). A supplemental CAN-(W)LAN gateway and the bus system option CAN is needed for this. system or other applications thanks to isolated net-work interface. This may be a necessary requirement, espe-cially in real-time systems. 3/38 Remote CAN Analysis > Wireless receiving and sending of CAN messages in case of difficult to access or mobile CAN bus systems > Usage of the original time stamps of the remote CAN bus e.g. in the Trace Window > Simultaneous analysis of the CAN communication on multi-ple Application Areas With support of Ethernet-based networks, the same use cases generally occur as in CAN bus systems in vehicle development, in particular topics relating to video data transmission, Diagnostics over IP (DoIP) and communication between electric vehicles and charging stations. Furthermore the function Remote CAN Analysis opens up new fields of use, such as simultaneous analysis of the data communication of multiple vehicles in Car2x systems, as well as remote monitoring of engine test benches and HIL tests. vehicles > Remote monitoring of CAN bus systems via WLAN/Ethernet CANalyzer.IP configuration for displaying signals. The Ethernet protocol and signal decoding are analyzed in the Trace Window. Filter for reducing the number of packets.